oil feed block

[twizdt]

okay i cant seem to find the answer to what im looking for.

I have a 95 eclipse gsx. with a t25 turbo, im installing a big16g tomorrow and relocating my oil feed to the head. My question is, what size bolt will i need to block off the oil feed at its factory location (oil filter housing)


also if anyone could tell me what size bolts ill need to put my jpipe on, oil return, and what size nut for the o2 housing stud. sorry i know im asking for alot
thanks in advance for any help,
mike

 

[19Eclipse90]

Those will all be the same size as for the same fasteners found on a 1G: http://www.dsmtuners.com/forums/articles-miscellaneous/437697-what-size-bolt-nut-stud-fastener-1g-version.html.

 

[twizdt]

all that has is oil feed location at the head and at the turbo. oil feed was at head for 1g if i remember so that wont help me unless im a retard haha

 

[BogusSVO]

Why do you want to feed the turbo from the head like a Ig? Most swap over and feed from the OFH.

 

[twizdt]

the stainless oil feed i bought is a feed from the head, so i need to grab a bolt tomorrow to block off the factory location on the housing

 

[Joethefallen23]

3/8 BSPT from what I remember. MHI turbos like the oil pressure found at the head not the OFH from what I've read.

 

[twizdt]

may i ask what bspt means? sorry. its gonna be my first install so i want to make sure it goes smooth

and joe i am talking about at the housing itself, not the breakway point halfway through the line

 

[Joethefallen23]

may i ask what bspt means? sorry. its gonna be my first install so i want to make sure it goes smooth

and joe i am talking about at the housing itself, not the breakway point halfway through the line

3/8 BSPT is British Standard Pipe Tapered. Its a pipe thread similar to NPT (BUT NOT INTERCHANGEABLE). It may be hard to find at a local hardware store but vendors like ExtremePSI and STM sell 3/8bspt plugs.

In fact: Click Me!

 

[twizdt]

thats what i need to block off the oil at the housing itself?

 

[Joethefallen23]

Yes.
JNZ has it
Extreme Psi has it

If it were me, I'd give JNZ a call so you don't get charged an obscene amount of money for shipping such a small plug. . Paul will probably mail it to you for the price of a stamp. They're actually in most Saturdays until around 1.

 

[19Eclipse90]

You'd have been looking for:
- Oil filter housing plugs and sensor threads
- J-pipe (washer assembled)
- Turbo oil drain line at oil pan
- Turbo oil drain line at turbo
- Downpipe to O2 housing (turbo) nuts

Like I said, it was all there.

 

[twizdt]

yea sorry man i totally forgot i posted i needed those other things as well. and i did find those on that page. thanks alot everyone for the replies. unfortunately i have to wait now for this plug before i can do the install. will give me a chance to get a 190 install kit and fic 650s i guess