2G Need help wiring starter to igniton!

[1992_Talon_tsi]

Ok post its for a (95 GST 7bolt) for some reason the black slim positive wire of my starter its not getting positive signal, i tried using a positive wire from the battery and it crank and started. Im not up to go through the whole harness just to see whats causing that im sure most likely its either burn wire or broken, i need help getting a wire from the ignition to the starter..

 

[turboglenn]

Either follow the stock one with the replacement to know where it goes or run a new one from the ignition out the firewall and to the tab on the starter. I guess i don't understand what you need help with if you already know you're replacing the wire with another??

Or you could do a push button starter, just get one of the actuall units or use a momentary switch of some sorts to supply the +12 to the starter

 

[1992_Talon_tsi]

Either follow the stock one with the replacement to know where it goes or run a new one from the ignition out the firewall and to the tab on the starter. I guess i don't understand what you need help with if you already know you're replacing the wire with another??

Or you could do a push button starter, just get one of the actuall units or use a momentary switch of some sorts to supply the +12 to the starter

Ok what im trying to do its wire the starter to ignition(key position), i just want to know from where do i have to run the wire to the starter, i heard the cable its black and yellow but what its the location of the cable i cant find it..