my first logs... car drives crappy..

[polishshark]

ok here are my log the car drives relally bad...i can't get past 3500rpm or it starts bugging it feels like it's fuel cutting...
i just installed new knock sensor too..
this one is just cruinsing
tima o2 tps rpm knock

13° 0.00V 18.4% 1094 0
22° 0.00V 18.4% 1594 0
25° 0.02V 18.0% 2000 16
20° 0.45V 18.0% 2031 20
21° 0.70V 18.0% 1938 24
20° 0.76V 18.0% 1688 24
18° 0.78V 18.0% 1469 24
16° 0.76V 18.4% 1250 24
12° 0.66V 18.0% 1063 24
7° 0.37V 18.4% 875 23
1° 0.16V 18.4% 625 23
0° 0.08V 21.2% 688 23
0° 0.02V 21.2% 563 23
0° 0.00V 21.2% 781 23
0° 0.00V 18.0% 688 22
5° 0.00V 10.2% 531 22
5° 0.00V 10.2% 938 22
-2° 0.00V 10.2% 1156 22
7° 0.06V 10.2% 1438 27
10° 0.57V 10.2% 1563 30
10° 0.74V 10.2% 1594 30
5° 0.80V 10.2% 1594 21
7° 0.80V 10.2% 1500 10
8° 0.57V 10.2% 1344 0
8° 0.18V 10.2% 1188
0



as you can see lots of knock and i think i'm really lean and the timming....


here is a log of idle after i drove it for awhile

12° 0.02V 10.2% 813 0
11° 0.02V 10.2% 813 0
13° 0.02V 10.2% 781 0
14° 0.02V 10.2% 781 0
13° 0.02V 10.2% 750 0
11° 0.02V 10.2% 750 0
12° 0.02V 10.2% 750 0
11° 0.02V 10.2% 688 0
15° 0.02V 10.2% 688 0
16° 0.02V 10.2% 656 0
14° 0.02V 10.2% 656 0
15° 0.02V 10.2% 688 0
9° 0.02V 10.2% 625 0
12° 0.02V 10.2% 625 0
16° 0.02V 10.2% 656 0
15° 0.02V 10.2% 688 0
10° 0.02V 10.2% 688 0
10° 0.02V 10.2% 719 0
6° 0.02V 10.2% 688 0
8° 0.02V 10.2% 719 0
8° 0.02V 10.2% 750 0
6° 0.02V 10.2% 688 0
8° 0.02V 10.2% 688 0
9° 0.02V 10.2% 781 0
2° 0.02V 10.2% 750 0
4° 0.02V 10.2% 781 0
4° 0.02V 10.2% 844 0
6° 0.02V 10.2% 844 0
8° 0.02V 10.2% 781 0
7° 0.02V 10.2% 781 0
9° 0.02V 10.2% 813 0
9° 0.02V 10.2% 844 0
8° 0.02V 10.2% 781 0
8° 0.02V 10.2% 813 0
10° 0.02V 10.2% 781 0
12° 0.02V 10.2% 844 0
8° 0.02V 10.2% 813 0
10° 0.02V 10.2% 781 0
11° 0.02V 10.2% 750 0
13° 0.02V 10.2% 781 0
10° 0.02V 10.2% 844 0
7° 0.02V 10.2% 750 0
12° 0.02V 10.2% 813 0
9° 0.02V 10.2% 781 0
10° 0.02V 10.2% 813 0
8° 0.02V 10.2% 750 0
12° 0.02V 10.2% 750 0
11° 0.02V 10.2% 781 0
10° 0.02V 10.2% 750 0
10° 0.02V 10.2% 688 0
14° 0.02V 10.2% 719 0
8° 0.02V 10.2% 719 0
7° 0.02V 10.2% 688 0
11° 0.02V 10.2% 719 0
10° 0.02V 10.2% 656 0
11° 0.02V 10.2% 656 0
14° 0.02V 10.2% 688 0
15° 0.02V 10.2% 688 0
10° 0.02V 10.2% 688 0
13° 0.02V 10.2% 688 0
7° 0.02V 10.2% 719 0
6° 0.02V 10.2% 719 0
7° 0.02V 10.2% 750 0
4° 0.02V 10.2% 719 0
8° 0.02V 10.2% 656 0
12° 0.02V 10.2% 719 0
7° 0.02V 10.2% 719 0
4° 0.02V 10.2% 719 0
9° 0.02V 10.2% 750 0
6° 0.02V 10.2% 813 0
3° 0.02V 10.2% 750 0
8° 0.02V 10.2% 750 0
10° 0.02V 10.2% 750 0
10° 0.02V 10.2% 781 0
4° 0.02V 10.2% 813 0
7° 0.02V 10.2% 781 0
9° 0.02V 10.2% 844 0
6° 0.02V 10.2% 781 0
7° 0.02V 10.2% 813 0
7° 0.02V 10.2% 813 0
10° 0.02V 10.2% 813 0
11° 0.02V 10.2% 844 0
8° 0.02V 10.2% 813 0
8° 0.02V 10.2% 781 0
13° 0.02V 10.2% 813 0
13° 0.02V 10.2% 844 0
11° 0.02V 10.2% 750 0
12° 0.02V 10.2% 719 0
15° 0.02V 10.2% 781 0
11° 0.02V 10.2% 750 0
10° 0.02V 10.2% 688 0
15° 0.02V 10.2% 719 0
12° 0.02V 10.2% 750 0
6° 0.02V 10.2% 719 0
8° 0.02V 10.2% 0 0
5° 0.02V 10.2% 0 0
5° 0.02V 10.2% 0 0
5° 0.02V 10.2% 0 0
5° 0.02V 10.2% 0 0


please help

andrzej

 

[BaddAssGst]

Start with a boost leak test and go from there. Do you have any mods?

 

[polishshark]

Start with a boost leak test and go from there. Do you have any mods?

yeah check my profile...
and if it's not boost leak?