2G Misfire after adjusting CAS

[jdm9221]

i have a 7 bolt head with a 1g CAS. I grounded timing to 5° through Evoscan and used a timing light set to 5° And adjusted the CAS til the marks lined up perfect when it flashed. I took the car for a drive and now its misfiring. It ran great last week, pulled it apart for a new timing belt (yes my timing marks are good) and set the CAS and now it has a misfire.

Has brand new br7es and it didn't help

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[91talonts1]

When setting the base timing with the pin grounded I think should you leave the advance on the light at zero.
The advance dial is for determining total timing.

 

[jdm9221]

So set the advance on the gun at 0 and evoscan at 5

 

[jdm9221]

So I set the timing light to 0 and grounded timing thru evoscan. The car runs fine when first started but when it warms up it starts misfiring again