The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Making a glowing DSM emblem on a 2G

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I posted that link for people who didnt want to chop up their front bumper but some people felt like that was an insult, which one wasnt even stated. Its completely removable and cheap so if you dont like it or the local law doesnt either you could pull it without leaving a hole.

Its a great link, im wanting one but only if the sizes are correct to fit into the bumper recess
 
You may be right but I like the laser effect bit, its cheap so I will see once I get to measure it up, I just dont want to cut holes in the bumper but I will get away with a small hole for the wiring on this emblem.

Also is that measurement from center out or from tip to tip of the diamonds? I always thought they were an exact size all round but when they replied with a different height to width now im not so sure unless I get more info from them

It's a tip to tip measurement
 
GJ Guys, Not something I would do I don't think. Maybe. But would go well with the Illuminated Eclipse Center tail I used to make years ago. Search for it on here, lots of people are making them now. I even saw one local.
 
Easiest thing for a Talon logo will be to get the emblem cut as a sticker and sandwich it between two clear pieces of plexiglass (for protection), with lights behind. Won't look "stock" during daytime, but beats having to manufacture a clear "Talon" shape out of some sort of resin.

And yes, this thread is old, but nice to see that some are still using it for ideas.
 
I would do something like this if it were me. No electronics, not cutting, hacking, simple paint job and boom. Would put this on my 16v dohc turbo side skirt's too. I would hope that others headlights would activate it.

The one in the vids have a little too much for my taste.

[ame=http://www.youtube.com/watch?v=blEI-64G6ZM]Glow In The Dark Cars - YouTube[/ame]

Glow Car

I like this one
Ultra Green V10 Water-Based Glow in the Dark Paint -

24 hour glow BABY!
 
I would do something like this if it were me. No electronics, not cutting, hacking, simple paint job and boom. Would put this on my 16v dohc turbo side skirt's too. I would hope that others headlights would activate it.

The one in the vids have a little too much for my taste.

Glow In The Dark Cars - YouTube

Glow Car

I like this one
Ultra Green V10 Water-Based Glow in the Dark Paint -

24 hour glow BABY!


That's flipppin siiiickkkkkkk.

A gallon of that paint is 299$.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top