Lower control arm lock nut size? (curved)

[squid267]

I have the part number for the lock nut : 40387C

But does anyone ahve the size. I went to home depot and could not find one. My local Mitsubishi dealership is going take a week to get it in. Anyone know this?

 

[coupedude]

not sure of size but as a resource you might want to try a granger or fastnel for your hardware needs

 

[19Eclipse90]

That isn't a part number. It is a PNC which, basically, is a reference number for Mitsubishi CAPS or ASA.

Fortunately for you, that nut ended up being part of the discussion that took place here, beginning in post 3: http://www.dsmtuners.com/forums/newbie-forum/364865-suspension-bolt-nut-sizes.html.

 

[n8dsmdriven]

m8 by 1.25 i believe sir

try a ace hardware or a small town"hardware" place like that... all the big corp stores will only carry the 1.5 pitch stuff rarely the 1.25 pitch

 

[19Eclipse90]

m8 by 1.25 i believe sir

try a ace hardware or a small town"hardware" place like that... all the big corp stores will only carry the 1.5 pitch stuff rarely the 1.25 pitch

M8 would be way too small. It is a M12 x 1.25, as the thread I linked states.