snowborder714
Moderator
- 16,181
- 380
- Oct 15, 2006
-
Mechanicsburg,
Pennsylvania
This is posted up on the link forums but figured I'd post it here for some more advice.
My brother and I have been doing some base tuning, trying to get everything running good. I would like other opinions as well. The first log posted (05292008-1) is a 3rd gear pull. The second log (05292008-4) is an idle log. We know that airflowperrev should be around .28, but it seems to like being around .32 and we're not sure how to get that down.
As of right now, these are the settings my bro recommended me to change after looking at the above logs:
Airflow
50Hz - 32
400Hz - 14
1600Hz - (-8)
Fuel
3500 - (-7)
4000 - (-8)
4500 - (-7)
5000 - (-4)
5500 - (-6)
6000 - (-4)
6500 - (-7)
7000 - (-8)
7500 - (-7)
8000 - (-7)
Drop all timing sliders 2 from 4500 on.
Thanks!
My brother and I have been doing some base tuning, trying to get everything running good. I would like other opinions as well. The first log posted (05292008-1) is a 3rd gear pull. The second log (05292008-4) is an idle log. We know that airflowperrev should be around .28, but it seems to like being around .32 and we're not sure how to get that down.
As of right now, these are the settings my bro recommended me to change after looking at the above logs:
Airflow
50Hz - 32
400Hz - 14
1600Hz - (-8)
Fuel
3500 - (-7)
4000 - (-8)
4500 - (-7)
5000 - (-4)
5500 - (-6)
6000 - (-4)
6500 - (-7)
7000 - (-8)
7500 - (-7)
8000 - (-7)
Drop all timing sliders 2 from 4500 on.
Thanks!