lb/min...

[Black'95]

41lbs/min at 25-26psi sound about right? I increased the boost about 3psi, and saw a 3lb/min increase in airflow as well. I didn't want to post in the tuning forum, since this seems too "noobish" for that.


Profile is up to date.

 

[99gst_racer]

It depends completely on which turbo you're running.

 

[Calan]

Depends on the turbo. On a s16g or 14b that would be close to a record; on an HX-40, something is wrong.

EDIT: Damn he's fast.

 

[Black'95]

Haha, thanks gents! It's one of those t3/t4 eBay jobbies. Or that's how they market it!

 

[99gst_racer]

Do you know which compressor it has?

 

[Black'95]

Do you know which compressor it has?

I want to say it's a 50 trim, and it's marked A/R .60 on the compressor housing and A/R .63 on the turbine housing.

 

[99gst_racer]

If it's a T3/T04e 50-trim, then you're doing alright. It's rated at about 49 lbs/min. I ran one years ago, and was flowing ~48 lbs/min at around 30-32 psi.

 

[Black'95]

Bringing this back from the dead. My laptop ran out of battery and I lost my log, but I turned up the boost to 30psi after upgrading my WG springs, and this thing is giving me 52lbs/min and maxing out my MAF . Just wanted to post this up, since I was having trouble finding much airflow info for eBay snails. Between the cams and stroker, spool is the same. Still no shaft play or smoking. I guess these eBay turbos are really hit or miss jobs...

 

[boost97gst]

Thats pretty good dude. I can say from your old post the mafraw figures look right for 41lbs. 52lbs at 30psi is very good. Congrats. Ebay turbo WIN!!!!

 

[jb2zero0six5]

What seller did you purchase from? Godspeed?

 

[boost97gst]

Bringing this back from the dead. My laptop ran out of battery and I lost my log, but I turned up the boost to 30psi after upgrading my WG springs, and this thing is giving me 52lbs/min and maxing out my MAF . Just wanted to post this up, since I was having trouble finding much airflow info for eBay snails. Between the cams and stroker, spool is the same. Still no shaft play or smoking. I guess these eBay turbos are really hit or miss jobs...

I forgot to mention, but im sure you know: Anything on a 2g maf beyond around 2200 is sketchy. People recommend going SD or evo 8 maf at that point. Ive actually seen 3250khz on my 2g maf! Its a mess up there though, things jump around and its inconsistent.

 

[Black'95]

Jb2: Haha, I got it off a buddy a few years ago for $40 because he thought it was blown! I have no clue where he got it from, other than eBay in general. I don't think he even remembers anymore.

And yes, boost97, thank you, I am aware of the MAF inconsistencies up there. I actually thought it was a little higher, like 2500Hz before it got freaky... Whatever, I have the SD setup from ECMTuning chillin' in my garage; I guess I'm just waiting for the weather to warm up a bit before I put it on... Oh, I have to get the bung welded into my piping for the IAT, that's what's holding me up. Lol thanks for reminding me haha!