is t04b a good replacement of big16g?

[techghost]

Hi All,
I just recieved another turbo its a t04b with 0.70a/r compressor housing and 0.58a/r turbine housing. compressor and turbine both look bigger then big16g and EVO8 16g.

Will it be good? my future aim is to hit mid or low 11's with 100+shot nos with this turbo on 25psi boost. will this be a good upgrade?? i will have a custom full race equal length manifold and more parts to reach that aim will be coming soon. its a 1g VR4-RS motor

attached are the pics, let me know if im good to go.

is it a t3 flange??

I'm in need of input guys. I also need to know which turbine housing is it? A t3? turbine housing a/r is 0.58

 

[techghost]

can anyone help me out with a suggestion ###?

 

[nuclearr]

Looks to be a t-3 flange as far as your other qestions I can not answer.

 

[dsm-onster]

That is either a .48 or a .63 a/r housing. Not a .58 a/r. They do not make a t3 .58a/r housing. You need to get the minor diameters of the wheels for us to help you. The name t3/t04 describes a frame size not a specific turbo. It has one of 11 different compressors, ranging in flow from 2lb/min UNDER your 16g compressor up to 60lb/min. And has 1 of 4 different turbine wheels ranging in flow from significatly under your 16g turbine up to 600whp. There's no use to buy a turbo if you don't have any clue what it is.

 

[techghost]

Actually I see .58a/r written inside the turbine housing and has a t3 flange. So I'm assuming its a t3 .58a/r housing.