hx35 oil feed

[chronicvex]

Iv searched everywhere so please dont stab me! I know there are threads about it but with no clear answer. Im having my hx35 rebuilt so i can put on. I havent removed bal shafts. Ill be feeding off ofh. What restrictor will i.need? And where can i get it? Ill be using a 10an dump because i couldnt find a 12an. Thanks for your help.

 

[JusMX141]

Missed this one, I assume.

http://www.dsmtuners.com/forums/turbo-system-tech/244467-holset-hx-35-oiling.html

...and this:

What are the requirements for oil feed to the Holset?



There is no clear answer because we can't possibly provide a clear answer for everyone. Holset has done this with the oiling information posted in the Holset FAQ linked above....it's up to you to build an oil supply and drain setup within the specs outlined there.

 

[sethpatch]

Iv searched everywhere so please dont stab me! I know there are threads about it but with no clear answer. Im having my hx35 rebuilt so i can put on. I havent removed bal shafts. Ill be feeding off ofh. What restrictor will i.need? And where can i get it? Ill be using a 10an dump because i couldnt find a 12an. Thanks for your help.

-12an fittings can be found on ebay, that is where I found mine. I had a -12an bung welded to my oil pan to make less hassle.

 

[HIGHPSI4]

So Couch, you just bumping all these threads just to get your post count up? You need to actually give some good advise in the posts.