[RESOLVED] Simple question about oil feed, holset HX35

[90tsiPA]

I've searched this for about an hour now with no straight answer. I have a 6 bolt with the balance shafts removed, a holset HX35 and I'm running my oil feed off the oil filter housing with a -4an line. I am going to modify the fitting to accept a nitrous jet to restrict it. My question is does anyone have an opinion on what size jet i should use? Any input on the jet size would be great.

 

[thebird_19]

http://www.dsmtuners.com/forums/turbo-system-tech/244467-holset-hx-35-oiling.html

 

[90tsiPA]

Thanks exactly what i needed