How do i know what model i got

[95gts-eclipse]

i have a 95 gst eclipse that is conisdered a 2g? im new to imports

 

[Jrgunn5150]

1rst gen is from 90-94, second gen is 95-99, third is 2000-2005, 4rth is current.

Your car is a 2g, or second gen

 

[95gts-eclipse]

Thank you for that bit of info! do you know anything about the stock turbo's in 2g's

 

[Jrgunn5150]

Nope, sorry, . I'm new too.

 

[95gts-eclipse]

HEHE thank you and good luck with ## endevors

 

[BK85]

95 and 96 where 2Ga's the 97 th 99s were 2Gb's, there was a change to the body (bumper covers and side skirts) in 97.

BK85

 

[Sinner]

Thank you for that bit of info! do u know anything bout the stock turbo's in 2g's

turbo's go fast and make a pssst noise

 

[dsmboy51]

... i like you

 

[t25fury]

Thank you for that bit of info! do u know anything bout the stock turbo's in 2g's

Club DSM , lots of good info, a little old but a very good starting point.

 

[95gts-eclipse]

My question i had about the turbo besides the psh sound i didnt know were was comeing from (haha j/k) my blowoff doesnt have a line comeing out of it for recirculation i guess just has a lil hole in rite side hrm???

 

[crimsondragon]

There are two lines for the BOV. One big, one small. The small line is on the top leading to the intake manifold. The big line leads to the intake pipe where it recirculates the charged air. Which line are you missing? And for your next possible question, 2g's run the T-25 turbo. My suggestion is the replace that line and search a bit more on these forums.

 

[95gts-eclipse]

dont wanna sound like an idiot but im new to imports so initals do me no good i was told from the blow off itself there is saposed to be a lil hose or something goin to the intake and i read that it would be the recirculateing hose but im clueless lamens terms please

 

[drewvr4]

Inform Yourself

http://www.dsmtuners.com/forums/newbie-forum/255119-bov-recirculation-hose-removal-effects.html

 

[95gts-eclipse]

hehe that didnt seem to help my car doesnt seem to be lagging all though ###### would notice the diff been that way since i got it i was just told it isnt good to not have but doesnt seem like the blowoff has a place for the hose to go but that could be the hole in the side i hate being completly clueless bout this stuff

 

[drewvr4]

Alright then check this out, its a different type of blow of valve but is working off the same principle and location

http://www.dsmtuners.com/forums/turbo-system-tech/182340-rfl-recirculating-i-did-pics.html

 

[95gts-eclipse]

looking at that pick if that tube comeing off valve goin to intake i have that the way someone else explained it im thinking of something else...is there a reason i should have a little hole in the side of my blow off is that normal?

 

[95gts-eclipse]

btw im not sure how forums work but i got like 2 other posts for other issues if u have time or the genral knowlage i seem to be lacking

 

[crimsondragon]

I think you really need to read some things first. The rules of this forum is sticky. And a lot of your questions can be answered with a bit of searching. There shouldn't be a hole in the side of your BOV either.

 

[95gts-eclipse]

yea sry im bad at forums just learning how to use them

 

[_DeS_]

Like stated earlier 95-96 are 2ga's, 97-99 are 2gb's for eclipses. But the talon's are 95-96 2ga and 97-98 2gb's. The 2g's come with stock with a t-25. You'll want to get rid of it very shortly because you will get bored of it

 

[99dsmGST]

At your point you are better off searching using the tab in the top of the page. Just type your question, click search and there you have it. I may not post as much here but been here and other forums to read and learn about our cars.

 

[MrBoxx]

VFAQ Site - Visual Frequently Answered Questionshas all your answers and more. Please look it over. When you're done reading the VFAQ pages and the 1000 FAQ page that's also at that site, come back here and go to the FAQ forum and read those.

 

[Hideki]

1000 FAQs about DSM's