90tsiawdturbo
10+ Year Contributor
- 524
- 1
- Apr 23, 2010
-
New London,
Wisconsin
So I've been searching all over the web and can't find a thing...I just bought an hks type 1 turbo timer....I got a harness with it...it's a male 6 prong plug on one side and a female 6 prong plug at the other end...in the middle of them two plugs there's a 3 prong plug with 3 wires coming out the backside of it :1 red 1 green and 1 white... My turbo timer has these wires out of the back of it: grey(parkingbrake), blue (speed sensor), black (ground), brown (rpm sensor), a bigger green(ignition) an a bigger red(12v positive)
now my question is...how do I wire my turbo timer to my harness...I can't put pics on here or I would....I'll be checking this thread quite often so if you have any questions just ask, you should get a quick answer.... And sorry if it's hard to understand^^^^
Nobody on on here with an hks tt type 1 wants to help me out? I've looked all over hks' website and they talk about everything but how to wire it to the harness...there's supposed to be little round metal plugs on some of the wires off of the turbo timer because there's three female plugs on the wires coming out of the harness...I just can't figure out which wires go to them three little plugs
now my question is...how do I wire my turbo timer to my harness...I can't put pics on here or I would....I'll be checking this thread quite often so if you have any questions just ask, you should get a quick answer.... And sorry if it's hard to understand^^^^
Nobody on on here with an hks tt type 1 wants to help me out? I've looked all over hks' website and they talk about everything but how to wire it to the harness...there's supposed to be little round metal plugs on some of the wires off of the turbo timer because there's three female plugs on the wires coming out of the harness...I just can't figure out which wires go to them three little plugs