HKS Turbo Timer IV Install...

[FunnyGas]

so i have been searching. i have found some information... but nothing that helps yet...
im wiring this in the hard way... its going into a '92 talon awd... i have it figured out for the easy stuff (12v+, ground, e-brake, accessory) but the IGN1 and IGN2 have me confused. on my skyline they were hooked together and hooked up to an ignition wire... but from what i have read so far it looks like i have to have those setup to seperate wires. thats what i'm looking for... what wires to hook the IGN1 and IGN2 up to on the car.
the TT has these wires:
RED - 12v constant
YELLOW - Ignition 2
GREEN - Ignition 1
BLUE - Accessory
GREY - E-brake
BLACK - Ground
its this TT...

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[93_tsi_fwd]

here ya go.
http://www.directwholesale.net/diagrams/printpage.asp?ModelID=15585&MakeID=17

 

[Puscifer]

Just incase you don't have this already -

http://[B]www.vfaq.com[/B]/mods/ecu-harness-1G.html

 

[FunnyGas]

here ya go.
http://www.directwholesale.net/diagrams/printpage.asp?ModelID=15585&MakeID=17

thanks alot! that helps a bunch... so after looking at that page... there is no ign 2.. so just leave those 2 hooked together... and ill be good to go! rock on!

 

[93_tsi_fwd]

No Problem!