Help!!! New Tranmission issues / questions

[blazinglaser_90]

Hey guys how is it going

i have a question that i need answered. I was putting a new drive shaft shop aluminum driveshaft into my tsi the other day and i went inside to grab so dinner and left the car up on jack stands b/c i just put the transfer case onto the car and was going to fill it with gear oil. I looked outside the one of the next door children was outside turning the wheels of my talon!!!

I have a TRE built transmission with a spool inside of the center diff. My question is since the transfer case was bolted onto the car with the driveshaft in it and everything hooked up and the transmission was in neutral do you feel that the spinning of the front wheels, even tho it was VERY minimal would effect anything inside of my new tranmission?


thanks guys
kevin

 

[Gary 420A RS]

there was no load on the car as it was on jacks. You should be good.

 

[blazinglaser_90]

alright i am just making sure b/c the rear of the car was still on the ground but the front end up was up in the air in order to get the transfer case on

just kinda being safe so i dont end up messing up the new transmission....well if it do mess it up i want it to be the right way and not by having a kid turn the wheels