Guess at HP / ETA on 1/4th mile?

[Trizon]

Well, to start its on street tires.. I just wanted a guess, no need to be accurate, i know every car is diff..

95 ( 2G ) GST

18G TD-05 turbo ( ported/clipped )
Greddy BIG fmic
greddy lower intercooling piping
hahn racecraft upper intercooling piping
HKS External Wastegate
magnecore wires.
Walbro 255lph pump
RC 550cc Injectors
Greddy AirNX Intake
Greddy S bov
SAFC
MBC
datalogger w/ properly tuned AFC
3" hahnracecraft downpipe + highflow cat
3" technologies & research exaust
2600lb ACT clutch

Motor has recently been rebuilt, so I just wanted an estimation from past experiences what they feel this would have/run at 21PSI? thanks in advance! I know its a corny question, but currently motor is being rebuilt due to them using wrong spacers.. they sent it out to mitsu, so I just wanted to know an estimation? -- thanks!

 

[blcknspo0ln]

depends on alot of variables... but given a perfect launch, perfect 2.0 [ no spinning ], perfect driving.. i'd say you could hit 12's

given average driving i'd expect mid 13's..

if you've never been to the track then 15's

 

[Trizon]

yeh hehe i expect to hit high 14/15s friends tell me my first run will be nothing but tires spinning

 

[Twizzle]

bench racing :thumbdown

take it to the track and see what you run.

 

[Trizon]

obviously that isnt a viable option at the moment... Once again I just wanted an estimation, but thanks for the info.

 

[Twizzle]

your question can vary by seconds..which would have absolutely no beneficial value whatsoever. it also depends on your driving...anyone can make a 10 second car a 15 second car. it would be better if you just looked at the 1/4 mile times, find someone with your mods, and find out. practically every combo has been recorded on that list.

 

[Trizon]

heh didnt know I had access to a list like that, thanks for informing me

 

[Race94]

dude if you don't hit low 13's easily burn it!

 

[dsmayhem]

Clearly you will have exactly 343.26 HP to the wheels. You will also run exactly a 13.652. Being the psychic I am I will tell you the the reason it is not lower is because you will hurt your foot in a sprinkler accident earlier that week and therefore will not be able to give it your all.

 

[meh]

go to the track, and find out first hand, now there is an idea...

 

[Trizon]

wow im just glad people having nothing better to do than be negative? I guess I should have rephrased it to "what could my max WHP be on this setup with stock internals?" -- meaning, i know people say max is around 400whp, but on this setup, if properly tuned.. my car is out of service atm, so the track isnt an option.. ty though for everyones input, even if it was negatively based.

 

[dsmayhem]

Ok...anywhere from 200-600HP and anywhere from 8sec-infinite(if it breaks down mid 1/4) quater mile times. I KNOW it will fall somewhere in there.

Now it does say that you have a 13.300 @ 0.000 in your profile with those mods so maybe near that as well.

 

[Trizon]

600hp on stock internals? well thats at least good news right! luckily i have thick skin, and people acting lame dont really offend me.. I apologize for the blatant ignorant, unspecific post, i was just curious and anxious =) thanks though

 

[Syndicate13]

No "bench racing". Bench racing is defined as posting hypothetical questions to try and see how fast or how powerful your car is or will be. If you want to know what time to expect at the track, or your car can beat another specified car, or how much power it will have with a particular modification (or mod list), then go to the track or the dyno and find out for sure. Do not ask for people to guess in our forums.

That is #9 on the rules list. You are in direct violation and could get banned for it. So stop whining, when you ask stupid questions, you get stupid answers.

 

[boostedinaz]

wow im just glad people having nothing better to do than be negative? I guess I should have rephrased it to "what could my max WHP be on this setup with stock internals?" -- meaning, i know people say max is around 400whp, but on this setup, if properly tuned.. my car is out of service atm, so the track isnt an option.. ty though for everyones input, even if it was negatively based.

Actually what you should have done was read the rules. I will post them for you:

#9 No "bench racing". Bench racing is defined as posting hypothetical questions to try and see how fast or how powerful your car is or will be. If you want to know what time to expect at the track, or your car can beat another specified car, or how much power it will have with a particular modification (or mod list), then go to the track or the dyno and find out for sure. Do not ask for people to guess in our forums.

We can not tell you this. I dont understand why it is so hard to understand that we can not guess at this. There are an infinate amount of vatiables that will make all our guess incorrect. At that point you will get mad becasue you didnt either make the number we said or we tell you to just go dyno and you dont want to spend the money.

Dont be lazy and cheap. You spent time and money to put on mods now do it again at a dyno.


Michael