2G Fog Light Hardware

[drthorp]

I've recently purchased a set of 2g fog lights with the bezel for my 96 that I've fitted with the 97 front bumper. I have the hardware needed to mount the actual fog lights, but the bezel is missing some clip/screw of some kind. Anyone have some insight as to how this is normally mounted? Thanks!

 

[nismojones]

This is what you need: U spring, get it at any hardware store. You should save your 2ga body parts in case you sell the car/etc. 2ga’s are harder and harder to find due to all the conversions.
Here’s a pic of the U spring, GL

 

[drthorp]

Good to know. I figured it was something along those lines. And I still have a kalapana black and silver two tone 2ga OEM fiberglass bumper and the headlights that I’ll keep with the car for sure. Thanks for the help!

 

[BLACK'98DSM]

If that mounting hardware is the same as the RS covers, I have what you need.

 

[drthorp]

I would imagine they are the same! I'll message you if I strike out at the hardware store. Thanks, man.

 

[Bland-Biscuit]

Are you talking about the lamp nut, the little clip you install the mounting screw into? If so it is part number MB623817. It was used for both the RS covers and the fog light bezels.

You can see what it looks like here: https://www.dsmtuners.com/threads/533732/

 

[drthorp]

Are you talking about the lamp nut, the little clip you install the mounting screw into? If so it is part number MB623817. It was used for both the RS covers and the fog light bezels.

You can see what it looks like here: https://www.dsmtuners.com/threads/533732/

I found what I needed, and this was a super helpful link! Thanks.