Evo 3 turbo set up, help?

[eclipsemustang]

alright so i plan on putting on an Evo 3 MHI this winter while my car is in storage and i just wanted to see if i was missing anything to complete the setup or anyone found something that worked well with that turbo. you can see what i hae in my profile.
what i have to get:

-fuel pump
-injectors
-AFC and datalogger or dsmlink
-EGT gauge

is there anything i am missing?

 

[kmoore]

A wideband wouldn't hurt.

And for the parts you have listed:

Fuel Pump= 190 or bigger (If you go bigger you NEED an AFPR)
Injectors= 650's (biggest for S-AFC)

Everything else looks pretty good though...

 

[kawboy]

You need a couple more pieces, which usually come in a 16g install kit

You definetly need a J-pipe with couplers to allow your LICP to bolt up.

I'd also get SS braided oil and water lines, along with all new gaskets (Turbo, Manifold, Etc)

 

[eclipsemustang]

yup im going to get the install kit with the tubo sorry i should've put that up there, and should i go with the AFPR and 650's or is it just as expensive to do the dsmlink

 

[kmoore]

I assumed you were getting the install kit. And If you go big than a 190lph fuel pump (say 255lph fuel pump) then you will need an AFPR but, if you stick with the 190 you'll be fine.

And if you have the money, deffinately go with DSMlink.