eBay Cast manifold

[zhjiln]

i know everyone says to stay away from ebay Tubular ex. manifolds..


but how about their cast iron ex. manifold ...

You must be logged in to view this image or video.

?????

 

[95blackGsTurbo]

It came up when you typed in the title.
http://www.dsmtuners.com/forums/bolt-tech/267431-ebay-cast-turbo-manifold.html

 

[Gamble97]

Why not get a FP Cast manifold?

 

[95blackGsTurbo]

Maybe he wants to run a T3 turbo. In which case buy the FP and get the adapter plate.

 

[zhjiln]

cool ill look up the FP one then...

 

[BigBeans]

The FP is worth the $60 difference.

It's a quality piece. A bit of a PITA to install, but it should be a one time thing.

If you don't get the bolts, you'll have to buy some locally and cut them.

 

[shadohc]

i would def use a fp mannifold instaed of ebay

 

[jm1080]

Fp manifold doesn't have external like in the pic though, do they?

 

[is0lati0n]

sometimes you will get lucky and find good manifolds on ebay, but to be safe of junk replicas, just go to the source website

 

[miniturbo23]

Fp manifold doesn't have external like in the pic though, do they?

turbonetics/slowboy both have a cast iron manifold w/external wastegate. slowboy it comes for mitsu or t3..

 

[agentorange313]

Doesnt treadstone put out the exact same manifold with 38mm off the runner wastegate?

I run the forced performance manifold and I use a punishment racing o2 housing with the wastegate recirculated

 

[flinguist]

HAFE also has a cast manifold with a 38 mm wastegate port, and it's stainless steel so you don't have to worry about cracking, or rust.

 

[jm1080]

you have a link to the HAFE manifold with 38mm wastegate? I too have been looking for this type of manifold as off the o2 is more expensive and it deletes the driver side fan.

 

[flinguist]

you have a link to the HAFE manifold with 38mm wastegate? I too have been looking for this type of manifold as off the o2 is more expensive and it deletes the driver side fan.

Slowboy sells them. Slowboy Racing, Inc. :: Mitsubishi :: DSM :: Exhaust :: Manifolds / Headers :: HAFE Performance :: HAFE Performance Cast S.S. 7cm DSM Manifold w/ 38mm WG Prevision

 

[DSM91TURBOTALON]

I would say get the FP manifold too, i just installed mine last weekend and it was a bit of a PITA but not too bad when i figured out a good way to line it up where it bolts to the turbo, just unbolt the lower IC pipe from the turbo it works wonders!! And also pray that you dont have a manifold stud break off into the head like 2 of mine did!! That was a huge PITA use some PB blaster in advance!!