Datalogger Cable

[T9S1i]

alright... im really broke, ive been all over the vfaq site and i just cant find out how to make a datalogger cable for a palm pilot...
i have the logger software... a palm V, but no cable to connect it to my car... it would be helpful if someone could give me instructions or a link to a site with instructions on how to make one... if someone has one for sale cheap let me know too.... oh btw its a 91 talon tsi awd so its for an obd 1 plug

ive been running my car on 10 psi because of boost creep for the longest time... i now got rid of creep and want to bump up the boost and feel some real power, but im not gonna do it until i can do it safely with a logger... any help please
thanks

Danny

 

[LessIsMore]

Here's a post with a circuit diagram for a OBDI diagnostic cable for use with a palm pilot.

http://dsmtuners.com/forums/showthread.php?t=100135&page=2&pp=25&highlight=logger

parts you will need (can be found at Radio Shack):

Small signal diode 1N914
10K Ohm Resistor
DB9 male serial connector
Serial Cable

board member steve provided the information above, I suggest you search all posts by him regarding datalogger cables. He knows his shit.