comming to a stop then dies

[on_campus15]

i have just recently installed an injen non-resurculative bov and turbosmart bee-port bov
and now my just dies when coming to a stop...pls help its driving me crazy..
is there a way to tune it to stop diying when i kick the clutch in????

 

[magik95]

You need a gm 3"maf and maft, or you need to recirc!!

 

[playitlouddsm]

Like already stated, you should recirculate your bov. So send back the intake and get one with a tube for the bov. Or you can go for the gm maft set-up.

 

[on_campus15]

what do i need to get for the gm maf setup??

 

[Talon2139]

The only other way, which i would not recommend, would be to bump the trottle adjustment, so it stays running. This way though you would be running rich at idle.

 

[slow4g6392tsi]

what do i need to get for the gm maf setup??

You would need a GM 3" (recommended) or 3.5" MAF, a MAF-Translator, and a UICP that is made to have the GM MAF put in it in a blow-through setup. I would not recommend going this route because it is expensive and a 2G MAF will not be outdrawn easily like a 1G's will.