1G chipped tcu.. will it work right

[enriquez2000]

I have a chipped tcu programmed for harder shifts and power mode. Part number is md755012 but that comes back to a diamante... will it be fine in my awd talon?

 

[poizondsm]

call don @ mitsubishi 303 465 5512, expert on innerchangeable parts

 

[enriquez2000]

Just left him a message. Dave at efi says it should work but it's either his chip or the tcu that didn't work

 

[donniekak]

I used a diamanté tcu in my auto talon last year. It worked fine. I didn't have an EPROM chip in it though, so the shift points were really low. I only used it for an option when not shifting with toggles.

 

[enriquez2000]

I used a diamanté tcu in my auto talon last year. It worked fine. I didn't have an EPROM chip in it though, so the shift points were really low. I only used it for an option when not shifting with toggles.

Did you still have overdrive?

 

[donniekak]

Yes I had overdrive. There are a couple different versions of the tcu. To make sure it's a tcu issue, and not a transmission issue, I'd disconnect the tcu, and force the trans into overdrive manually.

 

[enriquez2000]

Stock tcu has OD so not Trans related