2G Car will not start

[Talon Hostetter]

I have DSMLink v3. I have 1000cc injectors (not too sure what kind) and just can’t seem to get the idle right with air fuels and just get it to start anymore. I’ve tried throwing the fuel up and down and doesn’t help much. This is just what it does (in video)

I have full exhaust, intake, big intercooler, head studs, new head gasket, new spark plugs.

I just don’t know what I need to do. Please help get my car started. I can send logs if need to.

 

[Xarzor]

I would fill out a profile so we know what kind of car and engine we are dealing with. Have you done basic checks? What is your AFPR reading? Do you have spark? Any codes? Compression test? Boost leak test?

 

[1990TSIAWDTALON]

^^^ This
Yes a profile and add a log of the issue or the car turned on and trying to start so we can see settings that your ECMLink computer has in it.

 

[Talon Hostetter]

I would fill out a profile so we know what kind of car and engine we are dealing with. Have you done basic checks? What is your AFPR reading? Do you have spark? Any codes? Compression test? Boost leak test?

So no spark on cylinders 1 and 4 and throws code for camshaft position sensor circuit malfunction but it’s a brand new sensor in it because that was my issue before when it was getting no spark on any cylinders. Not sure what to do? I will get a log later. AFRs are fine I’m pretty sure

 

[Talon Hostetter]

This is my log for the no start. Compession is good but no spark but just replaced the cspc and it ran fine after that what else could be making it not have spark.