1G cam angle sensor install

[cgmtboarder]

hey i have no spark on my spark plugs and im guessing its the CAS so i am going to switch it today and see if this fixes the problem. My question is i have a 1g so is it just those two bolts that hold it and thats it? does it go in any special way? i just dont want to mess anything up cause ive never changed this before. thanks for any info

 

[cudadrt]

Yes it is held in by two bolts. As for which way it goes in, there are two ways. One way is correct for TDC and the other will have you 180 out. Here's a link with pics to help you. The CAs pics are about 3/4 the way down the page.

http://www.magnusmotorsports.com/tech/1gina2g.pdf

 

[cgmtboarder]

the link didnt work...

 

[cudadrt]

Link worked for me...but you can go to VFAQ.com and look as that's where I got the link from. It's posted on there as well or you should be able to try to copy and paste the link above. It is a working link.

 

[cgmtboarder]

alright now i got it working! i dont know why it was doing that at first. do you know if the 93 years will work on a 90 or 91?

 

[cudadrt]

Yes it will.