BOV recirculating tube

[925BoostKid]

Just bought a used FP intake pipe and noticed it is the model without the flange for BOV recirculating tube, however my car is pretty much stock besides a turbo back apex. In order to install the pipe where do I run the recirculating tube since my model does not have the flange?

 

[Street9s]

You have to somehow recirculate that air back before the turbo, and after the maf. Looks like you're going to have to get the one with the flange on it.

 

[99ECLIPSEGSXDSM]

You're going to have to modify the intake to allow the BOV to be recirculated. If you or a friend know how to weld aluminum it will be easy

 

[Street9s]

You're going to have to modify the intake to allow the BOV to be recirculated. If you or a friend know how to weld aluminum it will be easy

I already bought it. So that's out of the question..

 

[curt-s]

What? You already bought 925BoostKid's intake pipe? Or am I missing something here from between these two posters..

 

[19Eclipse90]

Content was edited and a couple posts removed to keep only technical information here. Any offers for trades or items for sale need to be handled through PM, not in the tech forums.

 

[Dillan]

You can use a diamond hole saw to cut a hole in the intake pipe then braze an aluminum pipe in if you cant weld aluminum. Make sure the pipe and hole saw are the same size as you bov outlet or very similar.