Blow off valve question

[iheartguns]

Hey I just put a 1g top end on my car and I noticed there's isn't anywhere to put the vacuum line coming off the bov into the 1g intake manifold like there is on the 2g manifold. Does it go somewhere else on the 1g?

 

[demonic racing]

Look for a vacuum source on the intake mani thats not being used.

 

[iheartguns]

Turns out my intake manifold is from a non turbo, so I need to tap In a vacuum port. Since I did an egr block off can I tap into the egr block off plate?

 

[Bud92gsx]

The 1g nipple for the vac line is to the right of the throttle body,behind the fuel rail..I have no picture im not at home..But its not hard to find..

 

[iheartguns]

Ya it's not there mines from a non turbo I guess. But can I tap into my egr block off plate?

 

[dsmlover94]

dont do it off the egr, just get a t connector and do it off the intake mani to brake booster line..

 

[Bud92gsx]

^ This is actually pretty common..i had mine that way for a while too..T off the fpr line,or the one for the brake booster.Theres an article or thread about it somewhere. Here,but im on my phone so i cant link anything right now..

Are u sure that on the n/t manifold there is no nipple for the vac line..I would say drill it and put a nipple in there,but the manifold is allready on the head, and you dont want metal in the engine obviously.

 

[iheartguns]

You must be logged in to view this image or video.

ya its a non turbo. i guess ill just t off the fpr line