black interior

[duy35]

hey bradikus7 where did you get those floor mats from?

 

[2GbTalonGuy]

That site just looks like a lot of fabric cut to wrap all the old stuff, not the actual trim pieces.

If you want to wrap the parts, a 10 min trip to your local fabric store would result in the same look. My friend did this with his rear panels in his Spyder. They didn't make any black ones of those, so he wrapped them. It took a few tries to find a spray glue that would hold. Alas, I don't remember what he used, or if it's even still holding up now.

Now that you mention it, it does look that way. And if so, F that. Fitment would suck if you wrapped all of that. You probably wouldn't even be able to get your glove box open.

 

[dalesmitsu]

Try sourcing a 1999 gs OZ rally, Gsx gst or gs spyder (maybe talons came with black interior not sure) interior they came with black leather seats black power door panels. Pretty much, half what you need to complete the conversion.

For black carpet, try ebay or rockauto. Rockauto would be better choice, they are a vendor and once in awhile have a discount special (this would save a few dollars, not alot but worth it). Headliner, Mmm ebay for that.

Best optionis to buy one thing at time like others say black pieces are to come by.

You can get the center console arm rest from the Spyder model, if you cant find one find one. I found one cheap from a junkyard.

I'm doing the same thing also, my RS has black manual panels but Im converting to power. Found majority of my parts just waiting for job to call me back to work, get funds to pick them up.

Post up pics after finishing the black interior. All black is nicer than tan/black

If anyone local wants to trade me my black manual door panels for black power panels, please pm

 

[2GbTalonGuy]

Try sourcing a 1999 gs OZ rally, Gsx gst or gs spyder (maybe talons came with black interior not sure) interior they came with black leather seats black power door panels. Pretty much, half what you need to complete the conversion.

No Talons were made in 99. So none had black interior.

 

[LarryJoe]

I've got the black/grey interior with black leather seats. I really like the look of the 2 colors together. Makes a nice clean OEM look. I don't think I'd paint the grey to make it 100% black.

 

[Psyclone]

what about carbon fiber? Does any one even make carbon fiber panels?

 

[tonyseagle]

what about carbon fiber? Does any one even make carbon fiber panels?

Topshopcarbon used to make lots.

 

[Psyclone]

thanks, ill take a look

 

[2GbTalonGuy]

There is sometimes a set on ebay. You can also get CF center consoles, armrests, vent panels, and door sils.

 

[Psyclone]

Thanks, Ill see If I can find any real CF floating around (not the fake cheesy looking stuff). I'll definitely post pics when/if I find/can afford the project.

 

[Awdspyderman]

Carbon is the choice im going to use so I can have an almost all black center console. To the OP I wound just check craigslist EVERYDAY=) I waited for a year and a half to find black interior. I got lucky one day and a guy was mad at his daughter for getting prego while still in high school and her spyder caught an engine fire a few days later so he parted the car out and i got all the black interior i could carry for 225.00!! I stripped that car for all that interior that i didnt even clean out the change that was left in the center console I wish i had taken the motor also but i was a day late=( Good luck man hope you find what your looking for=)

 

[2GbTalonGuy]

Looks like there are also CF kick panels available:

Carbon Fiber kick panels

 

[dalesmitsu]

Speaking of CF interior, this is my favorite.

Panels, headliner, center console and kick panels all cf.

2GNT.com Forums - Viewing message - Enter for Mod of the Month February!