Big(###) Brake Kit Help

[moto x]

SO I have the calipers off a galant 2 piston ones had them for awhile I finnally decide to pick up some rotors and pads today. They go togeather just fine pull out of the driveway and HOLY LATERAL RUNOUT. So I pull back in. Pop of the wheels put the lugs back on to hold the rotor on and they are way not on straight. But I cant figure out whats keeping them from going on. Like if you were to put a penny inbetween the hub and rotor. but I dont see nothing holding it out. AHHH Im going to bed.

 

[moto x]

Help?

 

[thorlief4g63]

Take the rotors off and clean under them and make sure there isnt anything under them. Good Luck

 

[moto x]

Take the rotors off and clean under them and make sure there isnt anything under them. Good Luck

Done that twice. Thanks though. Anyone else?

 

[steve]

The hub is radiused where it transitions to the center lip. Many rotors somehow are missing the matching radius on the inside that is required to sit flat. Careful touchup to the rotor with a die grinder can solve that problem.

 

[moto x]

The hub is radiused where it transitions to the center lip. Many rotors somehow are missing the matching radius on the inside that is required to sit flat. Careful touchup to the rotor with a die grinder can solve that problem.

BINGO!