aem Fuel rail help

[vgaroian]

Hey I just installed a new AEM Fuel Rail to my 97 eclipse gst spyder, i need help the whole engine turns on but shakes and i checked for any leakage and there were none i tried driven it and it seems like it wants to shut down it doesnt accelerate like it used to i need help.

 

[pj91gsx]

do a boost leak test you may have ruined a injector seal on the head. If you didnt replace the injector seals for the fuel rail or any o rings on the fuel rail they could have torn and be leaking.

 

[vgaroian]

I replaced the everything ill try the boost check

 

[Supa Dexta]

Did you touch your plug wires, or mix up injector wires..?

 

[The_EE]

Did you touch your plug wires, or mix up injector wires..?

+1, that is what it sounds like. You either mixed up wires or pulled one from the coil pack on accident.

 

[vgaroian]

no everthing is lined and all in order checked everything twice and still the same results

 

[vgaroian]

here is the pic of my engine

 

[vgaroian]

would it matter also that i have a stock fuel pump?

 

[pj91gsx]

I dont know. but you should rewire it at least since you have the afpr. The rewire kit will help out pretty good. How did the boost leak test go?

 

[vgaroian]

thank you all you guys are the S**T I finally got it running again thanks it was the one of the spark plug wires and one fuel injector

 

[vgaroian]

thanks pj

 

[Supa Dexta]

yay.. I'm the weiner!

But yeah, just a lesson learned, when working on specific parts of the car, only to go from running good> to troubles, just back track your steps on the parts you've touched.