780cc injectors with a HX35

[Boomdeeze]

How far can I push the HX35 with PTE 780cc injectors? I am running 23 dd on my SBR G50 right now but how far can I push the HX35 on 93 oct. until I would need e85 or race gas? And is it possible to run e85 or race gas in 780's?

 

[gofer]

These are good reads.
-Injector Supported Airflow
-HX-35 on E85

Your HX-35 can flow upwards of 53lbs/min depending on how much boost your running.
On E85...
780cc x 0.67 = 522.6cc injectors on E85 and the supported airflow looks like this for 550cc injectors.

550cc @ 100% IDC will support 39.48lbs/min
550cc @ 80% IDC will support 31.58lbs/min​

On 93 octane...
780cc flow like 780cc injectors on gasoline and the supported airflow looks like this.

780cc @ 100% IDC will support 55.99lbs/min
780cc @ 80% IDC will support 44.79lbs/min​

The above calculations show that on E85 your 780's will definitely not be enough injector to support the airflow of the HX-35, however on gasoline the 780's won't be pulling 100% IDC until 56lbs/min which is just fine.

 

[Boomdeeze]

Exactly what I was looking for!!! Thanks man