6 bolt swap up and running but revs slow..?

[Dsmwant2b]

ok guys i got the car able enough to drive on the road but it revs really slow .. coupleof thingsi have the maf sensor unplugged becaue it would not idlei think i have a vacuum leak behind the manifold which may be the problem or maf is bad but the car should still rev up maybe my cas timing is off.. any help would be appreciated

 

[keymaster]

First of all, plug your MAF back in. I'm kind of surprised it even runs without it. What do you mean "it wouldn't idle"? Was it dying? Was the idle high, low, what? Check your base timing with a timing gun, and plug in your MAF.

ETA: Have you checked "Invert CAS" in DSMLink and switched your firing order?