Resolved 1g auto swap shifting issue

[Rubne]

I'm looking for some help, recently I made manual to auto w4a33(1g) swap all stock, I'm using forcedfour basic plus box as standalone controller with 3g shifter.

I bought the transmission on ebay and was sitted for a year maybe more,

Trans Oil level OK with B&M Shift Trick, B&M oil cooler,

The Problem: When I used the first time I noticed that my shifts are 1st to 4th so I revert the solenoids connection so I get 1st to 3rd, but when I shift to 2nd or 4th nothing change, from 1st to 2nd there isn't change is only first and when go to 2nd to 3rd the transmission shift OK, the same for 3rd to 4th the transmission stay in 3rd and ignore the shift.

I can hear the clicking sound from the solenoids when I activated with 12v.

Thanks

 

[Rubne]

I'm looking for some help, recently I made manual to auto w4a33(1g) swap all stock, I'm using forcedfour basic plus box as standalone controller with 3g shifter.

I bought the transmission on ebay and was sitted for a year maybe more,

Trans Oil level OK with B&M Shift Trick, B&M oil cooler,

The Problem: When I used the first time I noticed that my shifts are 1st to 4th so I revert the solenoids connection so I get 1st to 3rd, but when I shift to 2nd or 4th nothing change, from 1st to 2nd there isn't change is only first and when go to 2nd to 3rd the transmission shift OK, the same for 3rd to 4th the transmission stay in 3rd and ignore the shift.

I can hear the clicking sound from the solenoids when I activated with 12v.

Thanks

My controller was the problem, maybe in the connections something short, one output was always ON, I recommend first check the shifting manually.