10- an fpr????

[Bmxr152]

i just bought a 10an fpr and i need to know what fittings iill need to use it

 

[jjrock5]

You will need -10 fittings....

 

[Bmxr152]

i figured that.....i was asking what ALL will i need like would it be best to go from 10an to 6an rather than trying to run 10

 

[gsxeclipsed]

-10an is huge you can buy a -6an to -10an o-ring boss (orb) thats the fitting that goes into regulator. I run -8an feed and a -6an return and its overkill but oddly enough it saved me money since i run an 044 inline. I would look into the -6an yo -10an orb so you can buy the fittings for the rail like this STM: FUEL RAIL FITTINGS | INLET & OUTLET | DSM | EVO |ALUMINUM | ANODIZE

 

[snowborder714]

I have an AFPR with -10 ports in it. I personally run a -8 line to my rail, as the -10 is just overkill. Just get a reducer fitting for the AFPR and then build yourself a -6 or -8 line with proper fittings (straights, angles, 90*'s...whatever will fit best).

 

[99gst_racer]

I agree that -10 is overkill. I would recommend using ORB reducer fittings to reduce it down to -6 or -8.

Also, the fittings you need you buy will depend on where you mount the regulator. See this article.