Recently bought a front and rear pair of Koni sport yellow shocks, taking advantage of the fact that they are on a 20% discount right now. I did this because I am sure that the shocks on my 2G are the original ones that came on the car from 98, and with that said I'm also reasonably sure that by...

This might sound kind of dumb, but can I flip my tie rod ends upside down to correct bump-steer?My 2G sits pretty low and I like it that way, but recently I've been reviving some horsepower, with plans for about 400-600 of those in the future and spirited driving has shown me some problems...

Hello all,I am considering lowering my 2G RS and I was wondering what coilovers I should get for her from different price points. Budget, Medium, and High End.Additionally, would lowering springs work as well if budget is tight? If so, any recommendations?Thank you for your help as always!

Hello everyone!The weather is warming up here in Wisconsin, and it's inspiring me to get back to working on my currently garaged 1990 Eclipse GST (FWD). I'm at a bit of a crossroads as to how I should move forward with a specific issue relating to the wheels and suspension system.I purchased...

Hey everyone, I'm looking to see if it's possible to find a upper spring seat for the factory shock assembly. I'm currently rebuilding my passenger side shock and I'm having quite the difficulty locating the seat for the spring below the top mount. I've called multiple part shops, dealerships...

98 Eclipse GS I'm installing KYB struts and the bump stop comes pre-installed. The metal "cup" fit on the inside of the OE dust shield but the way I put it on in the video makes sense to me.You must be registered to see element.

Hello,I'm looking to buy the front struts for my '92 Galant, according to the manual the lengths are 19.17 in, 13.39 in, and 5.79 in as seen in Figure 1. There's a KYB 235032 that has those same exact lengths (Figure 2), and a KYB 334030 (Figure 3) that has slightly different values and a...

Hey guys as the title says, my front tires have too much negative camber. It’s wearing on the inside pretty bad. With no camber adjustment from factory, how do I fix this?

I am not the most wealthy person, but do not want to cheap out on any parts for this build. I have a few options here to choose from that are in my budget. I’d love to hear what everyone’s opinions are on these options or even better ones… here is some pics of my 99 gsx, bone stock refurbished...

was wondering how much fender roll i’d need if i dropped my 1g about 2-3 inches. i have 16x8 rims rn but getting 17s in a little.

Heyo. so as the title says, I have a scraping sound from my right rear wheel, and the right rear of my car is lower than the rest of my car.We are looking at a 1996 (aug 95) Eclipse GS (FWD N/A, Manual trans)This problem started a few months ago. It slowly progressed until it got as bad as...

I’ve been searching around for a front upper strut tower bar but I can’t find like any of them, all I find are the rears, even eBay only has the rear strut tower. I could be blind or bad at searching but if there’s any brand, that sells them lmk or link them. Thanks!

Im looking into coils to lower my car and as far as my information has lead me Megan Racing Ez II are the best for the price, ive been looking at a couple sources to see how much they would cost, i noticed something odd when redline360 coils costed almost $100 dollars less than everywhere else...

I've been prepping for an overhaul of the rear end on my '92 Talon TSi AWD that I'm hoping to complete this spring, that I started a year and a half ago, it. On my first pass I removed as much rust and crud as I could from the control and trailing arms and painted them, with everything but the...

Hi, In my 99 Eclipse GSX, one of my front upper control arms and the matching mounting shafts were apparently changed at some point, but installed incorrectly or some bushings or washers have fallen out.These are unusual as they have a nut on the underside of the mounting shafts for some...

My 2004 Mercedes-Benz Sl600 has a busted ABC line in the front left wheel well. Car is sitting low, need advice on DIY.

I've been looking around but can't seem to find any more information on whether I can purchase and add spherical top mounts to BC coilovers. They don't come with it and speaking to BCRacing, they said that I can use the pillowball mounts and wasn't sure if this is as good as spherical top mount...

I'm replacing the clutch and fixing transmission issues on my '92 Talon TSi AWD, which requires detaching or removing some front end suspension parts, e.g. control arms, CV axles, etc. I figured I might as well remove everything, given how dirty and rusty they are and it's so much easier to...

I'm taking apart the front suspension members on my '92 Talon TSi AWD to derust and paint them, and looking at the strut assemblies, there appears to be an unsafe amount of rust damage on both sides and I want to get peoples' opinion on whether I need to replace the ASAP or if it can wait a...

I’ve seen posts like this a bunch and they all have the same answers. Here is the issue. I’m trying to get lowering springs for my 97 gsx. I already have Koni yellows, but I’ve been trying to find lowering springs. I wanted to get the eibach prokit. But it’s no longer made, same with H&R...

The goals for Talon have changed over the years but I've finally settled on a clear vision, make the DSM version of Porsche 911 GT2. Psychic steering, reliable power, corners like a Playboy Bunny Hool-A-Hooping, and has a license plate. In the days to come you guy's will follow along with me...

Hello Brothers and Sisters. I am offered a great deal on Tein Flex Z Coilovers; brand new at half the price. My question is, are the new model good as the old ones of 10 years ago? I currently have a set which I bought 12 years ago, so I am looking for a replacement.Thanks

Anyone know if the rear lower shock mount on a 2g gsx is available to buy somewhere? Its the mount the goes into the knuckle then the shock slides onto it then the 17mm bolt threads inside of it.

Anyone have strut braces on their 1G & would be willing to share the dimensions with me? Looking to make my own at work.

What if someone were to just replace their suspension with solid bars rather than coilovers/shocks for a race-only car? It would be the stiffest suspension possible, as well as reduce the weight of the car slightly. Would it be worth it for the cornering? Would there be any pros to using this...

Just a reminder to our customers, we have and still currently offer the full line of Fortune Auto Products @ STM !You must be registered to see element.2G DSM, Evo 8/9, Subaru. Any platform they make suspension for, we can get for you!Fortune Auto insists on building bespoke suspension...

what are your guys suspension/drivetrain mods/clutch setup/etc and 60 foots to boot? ...................... I got a set of full 1g koni yellows on tein springs, enkei evos on 235 poor man slicks (ice tires)The rest of my suspension is basically stock... I've got a lot of projects going on...