The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

IMG_2709.jpeg

Drag Race Build 95' Eagle Talon Drag Build

Restoring and building a Drag car from my 1995 Eagle Talon that’s been sitting abandoned over the last 10 years

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Updates have slowed and Ive been procrastinating doing anything on this car lately LOL (money goes out quicker than it comes in it seems like for this project).

Last night I put the car on all 4s and rolled it out of the garage, needed some garage space back. Since I "fixed" the brakes, there's currently nothing else I need to do with the chassis right now. I would love to get the car sent out to get a 8.50cert cage in it, but I feel the finances can be better allocated right now, like focusing on getting it running and driving. But I don't know if waiting to get the cage done will bring some unexpecting issues later on

Side note, I had purchased an Auto LSD rear differential back in September, but I still haven't received it. Reached out once and was assured it was getting shipped out that week. 4 weeks ago.. LOL Small setback but I would be lying if I said it didn't take the wind out of my sails ever so slightly

Now that the garage floor is cleared out again, I need to find some motivation to swap out the front clutches in my tranny. Im going to make it my goal to try to tackle this weekend, as ive got new pump gasket and ATF coming in the mail and ive been saying i need to replace the front clutches ever since I started this build thread LOL

Anyways.. here's the current status of the talon:|

IMG_5017.jpeg

IMG_5018.jpeg

** after uploading pictures, I realize the garage is a mess, oops. Add that to the list of chores this weekend 😂
 
Thats a wrenchers garage, no different on this end! ROFL
 
Thats a wrenchers garage, no different on this end! ROFL
I’ve neglected the garage for too long 😂 I ordered some cabinets, hopefully get this garage looking aesthetically pleasing over the next few weeks. Without fail, Every time I clean up my garage, it’s usually back to a mess within 24-48 hours
 
Welp after making an update to the build thread earlier today, I’ve found some magical motivation once I got home from work LOL

I didn’t know what ATF to go with, I typically reference Kiggly website for most things with my “new to auto” journey. Idk if this is the best choice, so if anyone has any better recommendations I’m all ears! Redline Racing ATF.

IMG_5047.jpeg


Okay finally getting down to pulling out and swapping the front clutches. This pump doesn’t look the greatest😬
IMG_5056.jpeg

IMG_5060.jpeg

IMG_5066.jpeg

Work benches are currently occupied so impromptu work space (cardboard box) for the clutches..
IMG_5065.jpeg
IMG_5069.jpeg
IMG_5070.jpeg


Not sure what to expect as I was told this transmission was slipping. I was expecting more severe markings (I still need to look at each individual disc, but still timid to separate them 😂)
IMG_5073.jpeg
IMG_5074.jpeg


Originally bought kiggly 6 discs but got the kiggly 5 discs to work better for my goals
IMG_5071.jpeg
IMG_5072.jpeg


Now I just need to find a container to soak the new discs. Sounds simple enough but I better do a little research to make sure I do it right. Like is Tupperware a sufficient container to soak these in?😂

Bare with me guys, I’m learning :thumb:
IMG_5075.jpeg
 
Productive week! Kiggly 5 discs have been installed, everything’s aligned up and seated, now fingers crossed it did it right! Next up is to remove the valve body and get it sent out for a build. Slowly but surely:hellyeah:
IMG_5080.jpeg
IMG_5083.jpeg

How i ended up soaking the clutches was I soaked them like this for about and hour, then assembled them into the basket and poured atf on each individual one by one, put the assembly into a ziplock bag and let it sit for a day. Hope this works 🤣
IMG_5112.jpeg
IMG_5113.jpeg
There was a Test N tune happening at my local track this weekend and I was going to try to get the evo done to make it for its first passes, but I think I’m going to wait. Still need to install extended studs on the front and mess with the tune. Leaning out really bad during spool 😵‍💫 found my fuel pressure solenoid had come disconnected so idk if that’s why it’s leaning out, but instead of rush it I think I’m going to wait to take it to the track.

Guess that means more work on the drag car this weekend :idontknow:
 
Last edited:
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • For sale 91-94 DSM eprom ecu 1g
    1g DSM ecu. It was sold to me as for a 1990 but when I tried it in 1990 it drove just fine but...
    • dsmmario
    • Updated:
    • Expires
  • For sale SouthBay/RCI 2200cc High-Z Fuel Injectors
    Set of 4 RCI/SouthBay Bosch fuel injectors. These are 2200cc high Z injectors that have clip-on...
    • Canadian_CD9A
    • Updated:
    • Expires
  • For sale 1g ThreeSpeedDesign scattershields.
    Three speed design 1g scatter shields. Stainless steel. Have half a dozen 1g Fwd. ($85) two...
    • Galant665
    • Updated:
  • For sale Misc parts for sale.
    1500cc, evo steering adapt, haltech
    • my98gsx
    • Updated:
    • Expires
  • For sale 4G63 Six bolt cy head. Ported. SS O-rings. Ferrara valves.
    Six bolt cy head. Hand ported and flowed by Baker Cylinder heads. He started at Air Flow...
    • Galant665
    • Updated:
    • Expires
Back
Top