1G wiring AEM UEGO wideband to work with v3

[wpla]

i need help with wiring the wide band so that i can use it with my dsm link v3. there are four wires that need to be connected i know where two of the wires go. i just don't know where the serial output wire goes, or the 5volt output wire goes. if some one could tell me how they wired theirs it would be very helpful.

 

[Imback]

Black-Ground
Red-power source
White- analog
Blue-Not used

 

[wpla]

what pin do i connect the white wire to?

 

[MY1GDSM]

To what ever free input the Ecu has... See here for a list.

Edit:

Let's make it simple here's the Instructions for the wideband... .

Also if you run to the EGR-t input the Wideband in your logs more then likely won't read lower then 11.0:1 from my experience without one of these.

And last but not least here is an explenation of Why click here.

 

[wpla]

thanks for all the help guys.

 

[MY1GDSM]

Not a problem

Post above updated with more info