Wideband Computer Mounting

[blazebolt]

I know where to mount the sensor on the exhaust. Now I'm wondering where everyone has their wideband computer installed. I have an LC-1 and I've read several people mounting the body of it onto the firewall. I'd prefer to mount it under the car, and am looking for a good place to put it. Also, here is an excerpt from the instruction manual, I just need to find that "suitable location"

"Find a suitable location under your vehicle where the LC-1 body can be mounted. Using zip ties or other suitable method, fasten the body of the LC-1 device securely to the framerails or other mounting points as far away from the heat of the exhaust system as the sensor cable allows. DO NOT zip-tie the LC-1 by the cables."

Thanks

 

[Spln_Hrd]

I would put it under the seat if you have room, under the car sounds like a good way to short out stuff when its raining, and the firewall would get the thing hotter then I would want mine to get.

 

[blazebolt]

Due to the size of the connector and the length of the wire from the O2 sensor, you cannot mount the LC-1 unit under the seat. Under the car and on the firewall are the best places.