Who has the highest WHP for a T/C'd 420A?

[2fast420a]

did you not just read what he wrote? the video shows his dyno sheet. pull the stick out of your ass and wait for the damn video

I've got news for you bud, he will never post a video or a dyno sheet. We've been through this in the past. This is just a delay tactic that he uses so people forget about the dyno sheet. People have been asking him to post up a dyno sheet for the last year. Guess what? No dyno :thumbdown

 

[Ryans99OZ]

yea how hard is it to post dyno sheet to shut everyone up....

 

[birdman]

its kind of a pain to post a dyno sheet. i finally just got mine posted over at 2gnt it took a while because you have to open dynojets runviewer to open dyno charts and it was a pain to do that then print out a sheet scan it then host it just so i could post the sheet. and 415cc injectors are good for about 15psi so 440s probably could support 17-18 at the most you culd hit 20-21 with some racegas. anyways i know its not the best but i hit 244whp and 230 torque on 13psi. my fpr couldnt support more then 12-13psi so i still have to install my s-fmu and go back to the dyno to tune for 300+. i posted a video a few days back im not sure if its still on here though.

 

[REDnFlyin]

its kind of a pain to post a dyno sheet. i finally just got mine posted over at 2gnt it took a while because you have to open dynojets runviewer to open dyno charts and it was a pain to do that then print out a sheet scan it then host it just so i could post the sheet. and 415cc injectors are good for about 15psi so 440s probably could support 17-18 at the most you culd hit 20-21 with some racegas. anyways i know its not the best but i hit 244whp and 230 torque on 13psi. my fpr couldnt support more then 12-13psi so i still have to install my s-fmu and go back to the dyno to tune for 300+. i posted a video a few days back im not sure if its still on here though.

It's not that hard, I've done it several times in the past. Besides siueclipse already has two dyno sheets hosted in his gallery. I don't think it should be too hard to host up the new ones. Sure a video might be nice but but the dyno sheet is just as good and a lot easier to get online. If he posts up the dyno sheet it might put some peoples doubts to rest. I'm with you guys though, I don't see 381hp at 20psi. 25+ maybe but not that low of boost.

 

[Ryans99OZ]

how much was that setup birdman?..including bottom end....and was it all worth it?

 

[leakyfaucet]

Seriously, what's your duty cycle on those 440cc injectors? If you've gone this far, for sure you know the duty cycle.

 

[97eclipseRS]

I've got news for you bud, he will never post a video or a dyno sheet. We've been through this in the past. This is just a delay tactic that he uses so people forget about the dyno sheet. People have been asking him to post up a dyno sheet for the last year. Guess what? No dyno :thumbdown

hes posted dyno sheets over at 2gnt before

 

[2fast420a]

hes posted dyno sheets over at 2gnt before

I'm on 2GNT and the dyno sheets he posted there are the same ones he posted here. If you know of any others by all means link them here or for that matter just have him post up the new dyno sheet to put this to rest.

 

[leakyfaucet]

I know he'll never answer that duty cycle question. Or he'll say "well, I don't know, I have someone tune my car for me" or some crap like that.

 

[miamieclipse]

hahaha ^^ nice

 

[turboed420A]

Allright everybody I posted some pics of my engine bay and a dyno slip from Torque Freaks. So nobody can call BS on me. I don't see why it is soo hard to take a picture and upload it

This one is for 270whp at 14psi with my old fuel setup:

Hahn 335cc injectors
vortech FMU 12:1
AEM FPR
APEXi S-AFC2

I don't know if you guys can zoom in but notice how the A/F ratio on the bottom goes up and down vs. a straight line after full throttle.

If you convert to a stand alone you solve this problem and add a hell of alot more fuel. During my last dyno run I even heard a ping!!!

I can't wait for the next dyno session when my stand alone is done!!!

 

[2fast420a]

Thats about right. If you look at siueclipse's dyno sheet in his gallery it is very similar. Now if we can just get him to post the new dyno sheet we will be all set

 

[birdman]

well i dont know. i have dyno charts on my computer. but i cant post the damn things on this site. its even a jpeg file and i still cant upload it. and for some reason my vortech fmu runs leans around 12-13psi. i had a the 4:1 disk because thats what it says use for 40-42pd injecotors but when i put the 8:1 disk in i had more fuel but still not enough for 15psi even with 415cc. i was thinkin of running my 12:1 disk but i figured that would be to much fuel pressure. Im hopeing the Vortech S-fmu solves this problem and lets me boost past 14-15psi which it should but its just sitting in my room for now waiting for me to not be lazy. the guys said at about 15-16psi i should def have 300+ whp. for now i blew my clutch though so until thats fixed and my s-fmu is installed im stuck at 244 whp. after these things are worked out back to the dyno i go. the the setup is def. worth it in my opinion i dont lose to very much out there but i do take losses sometimes. but i have yet to loose to a gst around here. A video of my car being dynoed at 11psi was just posted in the video link forums. heres the link if anyone wants to check it out http://www.dsmtuners.com/forums/showthread.php?t=134334

 

[2fast420a]

Hey siueclipse, it's been a week and we are still waiting for your dyno sheet or a video.

 

[SnoopySLR]

Geez, I think he is jealos or something. Suieclipse has been around here a long time. He has a lot under his hood. Don't get jealous if his 420a can beat your AWD 4g63

 

[2fast420a]

Geez, I think he is jealos or something. Suieclipse has been around here a long time. He has a lot under his hood. Don't get jealous if his 420a can beat your AWD 4g63

Wow, way to be a groupie. Have you ever seen a 12 second timeslip for his car? Have you ever seen a 12 second video for his car? Have you ever seen a dyno sheet for over 300hp for his car? NO, because they don't exist. I've seen a video of him in the 1/4 mile and I've seen a 264hp dyno sheet and I've seen video of his dash and him cursing a lot but that's it. There used to be a link up here showing what his car was pulling in the 1/4 mile back when he was claiming over 300hp. The video clearly shows him pull a 14.5 as a best run. I'll have to see if I can get the guy who had it to give me the link. If he has done better than I'm sure he won't mind posting up a timeslip or a dyno sheet to back up his numbers. I've been here just as long as siueclipse if not longer and I'll tell you right now there is nothing to be "jealos" over. Don't be a dipshit and try and turn this into a 4G vs 420a debate. I have owned both cars and heavily modded both cars so you don't know what your talking about. I sold the 420a because I wanted AWD nothing more. You need to remember something. Just because someone has a lot of money under the hood does not make them fast or have a lot of hp. Also when someone starts putting down serious numbers with HP like he is claiming they shouldn't have any problems posting a dyno sheet or timeslip.

So here we are again, does anyone have a link to a dyno of his for over 300hp? Does anyone have a video of a dyno or a run of his at the track? Does anyone have a link to any of his timeslips? I didn't think so. :thumbdown

 

[SnoopySLR]

Haha! Groupie... that was funny. I really could care less about this. I have my own car to worry about. I'm just wondering why your so persistant about this? Don't worry about it dude. If he's BSing everyone, good for him. I don't really care. I'm just hoping I can get my car up to 300 whp.

 

[2fast420a]

Haha! Groupie... that was funny. I really could care less about this. I have my own car to worry about. I'm just wondering why your so persistant about this? Don't worry about it dude. If he's BSing everyone, good for him. I don't really care. I'm just hoping I can get my car up to 300 whp.

Sorry if that came off harsh. The reason I'm so persistant is because every time I have asked him in the past to prove his claims he has NEVER once shown any proof. Back when I had my built 420a it was an insult and now it is an insult to the people who actually take the time to put down numbers and back them up. I mean how can you take technical advice from a guy about a 382hp setup when he clearly does not have one? There are several 420a guys who are putting serious hp down and decent times at the track. Every one of those guys has proof. I'm just sick of the lies and until siueclipse shows any proof of his hp or dyno numbers I call BS :thumbdown

 

[turboed420A]

Can I get a AMEN for that......

No dyno slips, No time slips, No proof of WHP :thumbdown

 

[RHui_BC]

i guess we'll see... i know 350+whp is not an easy thing to do on a 420a...

 

[leakyfaucet]

I really could care less about this.

That means you do care, if you have care to spare.

 

[Eclipse96Ryder]

some guy made 270whp on hahns 335cc injectors...i think 380 might be reachable with 440's...it would also be much easier if he got some 660's or something like that

 

[2fast420a]

some guy made 270whp on hahns 335cc injectors...i think 380 might be reachable with 440's...it would also be much easier if he got some 660's or something like that

siueclipse made 264 barely on 310cc injectors so I know that's possible because we've seen the dyno for it, but like I said he is not making 382hp on pump gas at 20 pounds of boost. When I see the dyno for it I'll believe it until then I'm still calling BS :thumbdown

 

[GSGoinFast]

i want to see this too. hes been doing this for how long? if theres no proof then any one can go around talking about there 13458943hp setup, and no one will know who actually has the experience with it and who doesnt, whos achieved it and who hasnt.

 

[Turbo 420a]

Not at all trying to be a hater, but I would really like to see the 382whp dyno sheet siueclipse. Mainly because I've never seen a 420a dyno sheet with that much power. I know 350+hp 420a's are out there, you just dont see many dyno's of high hp 420a's, so it's something I really want to see.

Thanks a lot if you could scan it or something