The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

whats next for me to do

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

skeeter4200

15+ Year Contributor
377
0
Jan 9, 2008
Boise, Idaho
My question is what is next for me to do? Ive been trying to decide and I cant, but I want more power ( dont we all ) below is a list of my mods any help would be great

Magnaflow Cat Converter HKS Super Mega Flow air filter Injen intake pipe Big 16g turbo ported and clipped (T16G (large) Apex'i big FMIC (front mount intercooler)kit 1g metal blowoff valve Magnecor 8.5mm silicone plug wires RC Engineering 550cc injectors Lancer EvoIII Port and Polished Exhaust Manifold Lancer EvoIII O2 Housing 40mm tial External Wastegate 3" downpipe 3" full Apex'i N1 stainless exhaust Safc-II walbro 255lph HKS EBC

:talon:
 
well. its best to have it rewired for best "performance" helps more throughout higher rpms by keeping a steady voltage.

DSM Link is definetly a must if you wanna get the best out of your car....other than AEM EMS of course.
 
Arp head studs, gotta be able to keep that head gasket from blowin with all that new boost! Then you could always throw some better cams in, but I wouldn't say it's a must. Ditch that pos light show a/f guage for an egt guage.(exhaust gas temp). And another + for dsm link.
 
If money isn't a problem go with the hks, but crowers are cheaper. Also I would seriously take a look at some headstuds!
 
Wire the pump, i have the 255 and it was on stock wiring and after adding an AFPR that actually flows decent, my fuel was falling off anywhere past 5k-5.5k RPM ( and my car is fully decked out with management and it still was falling way off). Cams would be a good upgrade from where you're at then some good management and you'll be set for all future upgrades and be able to take advantage of hat you have already even better.
 
Sounds like you have the first basic mod list done. So I would go with some cams(hks 264/272), bigger injectors cause 550's are done at 300whp, and have it retuned.
 
DSM link is a must practically. Great way to help you engine last and get the most power. That cam combo will also be great for the higher end. Then what everyone else said rewire and injectors. That will throw you over 310 i bet. If money isnt a problem then maybe a built 6 bolt is in order? Also the clutch will be needed to handle all that. Maybe suspension if you want better handling.
 
Lightweight flywheel (11-14 lb), if you don't mind losing a little pop off the line for some quick revving in 1st-2nd gears. As mentioned already: ARP headstuds, DSMLink, bigger injectors, rewired fuel pump, cams.

With that combo, 25 psi of boost/high octane race fuel/lot more tuning you should pull 350 w.h.p. It's all about the boost:cool:
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

  • Wanted 4G63 WTB Evo 560cc injectors or 450cc
    Im looking to pick up a set of evo 560cc injectors or possibly a set of 450cc injectors if the...
    • eclipsemf
    • Updated:
    • Expires
  • Wanted 1g Looking for pn MB522081
    Looking for a factory 1g double din radio bezel pn MB522081
    • Kgilis
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Can ship UPS ground. Message...
    • Galant665
    • Updated:
  • For sale 2g 2g Talon tail lights.
    Pair of 2g OEM Talon tails. Decent condition. Not show quality. Right has a section on bottom...
    • Galant665
    • Updated:
  • Wanted [WTB] Hyundai 4g63 inner valve cover bolts
    Looking to source inner valve cover bolts for a Hyundai 4g63 valve cover
    • TheDude236
    • Updated:
    • Expires
Back
Top