whats is wrong with this?

[yukiz]

started this morning, my wideband wont log, so i take a look at ecu pin, it seems fine.... but when i try to connect to dsmlink... i cannot log these value.... please, need help asap... thanks!

You must be logged in to view this image or video.

Uploaded with ImageShack.us

 

[SpawnedX]

0 RPMs...so the car wasn't running...what happens when you actually turn the car on.

 

[yukiz]

the car starts, and idle's fine..... im just affraid to drive it around. i might want to take a look at the ECU.

 

[SpawnedX]

All of the grayed out items require the car to be on. In the picture you posted it is very clear that the car is not on.

 

[yukiz]

the car is off, but when i turn it on to idle, the value wont display anything, just grey.....

 

[SpawnedX]

Then the ECU is not returning any input from the sensor, bad sensor or bad connection.

 

[yukiz]

could it be from not disconnecting battery?

 

[SpawnedX]

I don't see why, check your connections. Is the gauge at least working?

 

[yukiz]

gauges all working fine, temp, turbo, oil pressure all fine like normal...

 

[SpawnedX]

I mean your wideband gauge.

 

[yukiz]

no gauge..... output logged directly to ECU.....here's the log....

 

[Killa_dsm]

It could be because those things were not captured during that log. Press F12 and add them to the "captured values" while connected to the car.

 

[yukiz]

It could be because those things were not captured during that log. Press F12 and add them to the "captured values" while connected to the car.

Man, thanks to you! 3 hours wasted trying to figure out..... Help me AWD swap next time.... hahahahahah.....

 

[Killa_dsm]

Well I actually have experiences with link so I am glad I could help out.
And doing a awd swap isn't all that difficult.

Just curious Michael do you run dsmlink?

 

[yukiz]

yes, i run dsmlink v2...... lost most of good settings because ECU was reset.... i forgot to backup the settings.....

who is Michael again?

 

[Killa_dsm]

yes, i run dsmlink v2...... lost most of good settings because ECU was reset.... i forgot to backup the settings.....

who is Michael again?

Well if you have any old logs you can use that to reinstall your tune. Michael is SpawnedX, was just asking because some of the advice he was giving.

 

[twdorris]

If you haven't seen them yet, our website has a set of demo videos showing how to use basic functions like captured/displayed values.

ECMTuning, Inc.

There's also a datalogging "basics" here:

ecmlink101datalogging [ECMTuning - wiki]

Thomas Dorris
ECMTuning, Inc.