What wires are necessary?

[awzer2]

Okay so im removing my engine right now,and i was going to solder some wires that got mutilated.
My question is,What wires are necessary to run my car and have it street legal? I removed the a/c,removed,cruise control and my stereo wires are a mess. Check out the flicks.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

thanks guys.

 

[born2tune]

well first off, to keep it "street legal" all you have to do is check and comply with your emission regulations for your state (if any)

and now as far as wires go most of them are for sensors to keep your engine going right in conjunction w/your ECU, unless you have dsmlink or equivalent you can mod it to remove some sensors if necessary, as far as street legal i think you have a misconception of what that means. i would leave all wires connected to components that you do have, minus the parts you are removing ofcourse.

i just noticed you are in cali, worst state for emissions that sucks bro, i heard you cant even lower your car unless you pay and have a shop do it and have name brand suspension to keep it legal, is this true?

 

[agarc023]

well first off, to keep it "street legal" all you have to do is check and comply with your emission regulations for your state (if any)

and now as far as wires go most of them are for sensors to keep your engine going right in conjunction w/your ECU, unless you have dsmlink or equivalent you can mod it to remove some sensors if necessary, as far as street legal i think you have a misconception of what that means. i would leave all wires connected to components that you do have, minus the parts you are removing ofcourse.

i just noticed you are in cali, worst state for emissions that sucks bro, i heard you cant even lower your car unless you pay and have a shop do it and have name brand suspension to keep it legal, is this true?

I don't think that suspension stuff is law here, either that or the cops aren't doing their job very well

 

[snowborder714]

Here's a few posts of what my brother and I did to his harness. Keep in mind, we don't have emissions on our cars, so we are able to do more than you will. But you should be able to figure out what is needed for emissions and whatnot and what you should be able to get rid of.

http://www.dsmtuners.com/forums/151531916-post5.html
http://www.dsmtuners.com/forums/151671032-post172.html
http://www.dsmtuners.com/forums/151674847-post194.html
http://www.dsmtuners.com/forums/151676333-post199.html

 

[awzer2]

well first off, to keep it "street legal" all you have to do is check and comply with your emission regulations for your state (if any)

and now as far as wires go most of them are for sensors to keep your engine going right in conjunction w/your ECU, unless you have dsmlink or equivalent you can mod it to remove some sensors if necessary, as far as street legal i think you have a misconception of what that means. i would leave all wires connected to components that you do have, minus the parts you are removing ofcourse.

i just noticed you are in cali, worst state for emissions that sucks bro, i heard you cant even lower your car unless you pay and have a shop do it and have name brand suspension to keep it legal, is this true?

haha mostly but not the lowering part!
And one funny thing out here in southern cali..most smog shops are run by certified green card holders haha. put your money in the right places and we can run ALMOST any car we'd like. ..not that i support this.. but yeah,haha.

Here's a few posts of what my brother and I did to his harness. Keep in mind, we don't have emissions on our cars, so we are able to do more than you will. But you should be able to figure out what is needed for emissions and whatnot and what you should be able to get rid of.

http://www.dsmtuners.com/forums/151531916-post5.html
http://www.dsmtuners.com/forums/151671032-post172.html
http://www.dsmtuners.com/forums/151674847-post194.html
http://www.dsmtuners.com/forums/151676333-post199.html

WOW, thank you for the guide-like links! you went through a lot.
How long did it take to rewire?

 

[snowborder714]

We didn't work on it from beginning to end, so I can't really give a time estimate (still a few things to wrap up actually).

 

[awzer2]

We didn't work on it from beginning to end, so I can't really give a time estimate (still a few things to wrap up actually).

oh okay well im going to bombard you with pictures is that ok?haha i didnt label the connectors properly i wrote A1-A2 B1-B2 and so on. shoot.

 

[snowborder714]

I might be one step ahead of you
http://www.dsmtuners.com/forums/art...047-2g-engine-bay-electrical-connections.html

 

[awzer2]

I might be one step ahead of you
http://www.dsmtuners.com/forums/art...047-2g-engine-bay-electrical-connections.html

Lovely! thanks ya!

This should be fun....

You must be logged in to view this image or video.

what do i do????[

You must be logged in to view this image or video.