What to strip from a 94 GS-T motor?

[Yoshi]

my friends had a stock 1994 GS-T and he got in a lil fenderbender and his rear bumber is touching his back seat... but he was gonna get it hauld to a scrapyard but i bought it off of him for $300 and i was wondering what would be good to strip from the block for my 97 GS-T?

 

[airmail96]

Intake manifold and throttle body are a def. Take his piston rods too .

 

[Yoshi]

Intake manifold and throttle body are a def. Take his piston rods too .

would i have to get the intake bored out to fit or could i just bolt it on?

 

[v8killar]

Take his BOV to. The 1g BOV is alot better then our 2g POS plastic one. I know it's not from the block but you have it sitting there so why not

 

[andymoraitis]

In additon to the parts mentioned above, grab his 14 turbo, lower intercooler pipes, the J-pipe and the oil feed lines. With some new gaskets and a bit of install work, you'll have a much more enjoyable turbo. Also, the 1G intake manifold and head do not automatically port match. The head will need to come off and undergo porting to match the intake.

Andy

 

[airmail96]

AS far as i know the intake manifold is a bolt on afair there are some sensors that might need holes tapped. http://www.dsmtuners.com/forums/showthread.php?t=69924 theres a link for mounting the 1g throttle body to a 2g intake manifold

 

[Yoshi]

my friend has a GS-T also and he wants to know if he can get a 1g tb and intake manifold off any 1g motor or does it have to be off another GS-T

 

[airmail96]

I think you can get it from any 1g 4g63t motor, but some say it can only come from the 91-94 motors.