What HP am I?

[grail97]

i have a 2g gsx running 32psi on a 57trim with a .48ex 680 precisions on a hks vpc gcc setup and a dejon tool race fmic on a aluminum rod ross piston 2.0 built bottom stock head cam intake mani setup... I have a built head smim and cams im going to install just not right now. just curious if anyone has any idea what kinda #'s im running since I cant dyno the car... I have raced a couple ws6 t/a's and a built 5.0 mustang but dont really know how fast the car is. I wanna get a bottle back on it and take it to the track but cant afford it right now.

You must be logged in to view this image or video.

 

[DeNoZZo]

i have a 2g gsx running 32psi on a 57trim with a .48ex 680 precisions on a hks vpc gcc setup and a dejon tool race fmic on a aluminum rod ross piston 2.0 built bottom stock head cam intake mani setup... I have a built head smim and cams im going to install just not right now. just curious if anyone has any idea what kinda #'s im running since I cant dyno the car... I have raced a couple ws6 t/a's and a built 5.0 mustang but dont really know how fast the car is. I wanna get a bottle back on it and take it to the track but cant afford it right now.

You must be logged in to view this image or video.

Put that baby on a dyno

 

[grail97]

i dont wanna dyno it till i get it done and funds are 0 right now.. car pulls hard and doesnt studder or bog, just curious what it is close to...

 

[imagine3163]

This is completely considered bench racing and this thread will most likely be removed by the mods...just and friendly heads up

 

[propeine]

Take a log of your 70mph-90mph time and you can get a better idea based on what other people have ran.

 

[grail97]

bench racing huh, wtf r u talking about. im just curious approvimately what my hp is i posted specs and am just curious. im someone said i hav e a stock 1g with evo big 16g and 550's and a fmic someone would have a rough idea cause they've had that setup before, im just curious i went from a 82ex t67 running 38psi on 1k to this for a more streetable setup and am trying to get an approximation of what im running. if a mod deletes it hes contridicting what this forum area is for which is where all noobs are suppose to post which i am doing with supplied information for a response..

 

[soldave]

bench racing huh, wtf r u talking about. im just curious approvimately what my hp is i posted specs and am just curious. im someone said i hav e a stock 1g with evo big 16g and 550's and a fmic someone would have a rough idea cause they've had that setup before, im just curious i went from a 82ex t67 running 38psi on 1k to this for a more streetable setup and am trying to get an approximation of what im running. if a mod deletes it hes contridicting what this forum area is for which is where all noobs are suppose to post which i am doing with supplied information for a response..

You really want to be careful criticising the moderators so early on in your post numbers. As for bench racing, The Urban Dictionary comes to the rescue once again:

Bench racing
1. To discuss the possible quarter-mile elapsed time (E.T.) of a car based on a list of modifcations or horsepower estimate.
2. To discuss the estimated output (in horsepower) of one engine versus another based on lists of modifications done to each engine.
3. To discuss "which is faster?" or "Which would win in a race?" between two cars, based on 1 and 2 above.

No bench racing talk allowed on the forum. Save some money, get it to a dyno and find out how much power you've got.

EDIT: Just found the mods' definition of bench racing, which will be appropriate to this site:

Bench racing is defined as posting hypothetical questions to try and see how fast or how powerful your car is or will be. If you want to know what time to expect at the track, or your car can beat another specified car, or how much power it will have with a particular modification (or mod list), then go to the track or the dyno and find out for sure. Do not ask for people to guess in our forums.

 

[grail97]

You really want to be careful criticising the moderators so early on in your post numbers. As for bench racing, The Urban Dictionary comes to the rescue once again:

Bench racing
1. To discuss the possible quarter-mile elapsed time (E.T.) of a car based on a list of modifcations or horsepower estimate.
2. To discuss the estimated output (in horsepower) of one engine versus another based on lists of modifications done to each engine.
3. To discuss "which is faster?" or "Which would win in a race?" between two cars, based on 1 and 2 above.

No bench racing talk allowed on the forum. Save some money, get it to a dyno and find out how much power you've got.

 

[imagine-02]

grail97, face it. Your bench racing.
Even if someone had similar mods to you, there are still a million factors that come into play about guessing your hp.
Why do you need to know your hp so bad any way?

 

[soldave]

See the mods definition of bench racing I also posted.

I beat the lock!

 

[chico904]

Seriously bro??
Im waiting for Defiant to chime in on this one......
Until that time, if you aren't going to go to the dyno, I would suggest trying to find someone else on the site with a similar setup and private messaging them. However, even then there are too many variables to just "guess".

 

[LTUDSM]

i would say 210 WHP

 

[imagine3163]

bench racing huh, wtf r u talking about. im just curious approvimately what my hp is i posted specs and am just curious. im someone said i hav e a stock 1g with evo big 16g and 550's and a fmic someone would have a rough idea cause they've had that setup before, im just curious i went from a 82ex t67 running 38psi on 1k to this for a more streetable setup and am trying to get an approximation of what im running. if a mod deletes it hes contridicting what this forum area is for which is where all noobs are suppose to post which i am doing with supplied information for a response..

Looks like you also need to work on your grammar...

 

[8urv8]

You should also use proper grammar, punctuation and spelling at all time's when posting here.

 

[->PrOjEcTGS<-]

Straight from our rulebook.

What NOT to ask in the forums:

- If I bolt on "x" part, how much power will I gain?

- I want a 10-second daily driver- what parts will I need? which turbo?

- What should my first mods be?

- Which turbo is the best?

- Which is better - FWD or AWD?

- Why do people here not like ricers?

- Isn't the Fast & the Furious the best movie ever?

- Are altezza tail lights cool?

- How do I make my BOV louder?

- Should I buy a DSM or a Honda?

- Why are people in "X car forums" so ignorant?


These questions are either considered "bench racing" (which is not allowed), are very easy to find the answer to if you looked through the resources mentioned above, or will draw negative reactions from the performance community. Once you learn more about DSMs, you'll begin to understand what we mean.

Welcome to our community!! Glad you sold the Honda.

 

[LTUDSM]

i don't even think is your car dude,because with setup,that you have, or you wish you could have, wouldn't be asking that stupid question....

 

[atlguyinbama]

+1 on last post.

 

[TxR6guy]

Okay ill bite, ill say with those mods your at 650 awhp easly man.

 

[imagine-02]

maybe pushing 1000 awhp?

 

[Artago]

Thread closed by Defiant in.....

 

[Artago]

3.....

 

[soldave]

maybe pushing 1000 awhp?

You're joking! He hasn't got a single HKS sticker in there.

2............

 

[Artago]

2...

 

[Artago]

1...

 

[No_Skillz]

i would say 210 WHP

No, I would say that's at the crank.

180whp.

I'm going to agree, however, that if that car was yours, a dyno run wouldn't be an issue considering the money you've already thrown at it.

If it IS your car, please humor me and reply with a picture of the FPS circled. Then I will give you an amazingly accurate EYE-Dyno number.