What goes to these ports?

[Colt90tsi]

Well I am just about done with my swap and have a few questions.

My shifter linkage is hooked up but when I am in neutral I can only go the right and not the left, it feels like its jammed or something, do I just need to adjust the shifter linkage tighter?

Also this is a 90 to 91 swap so from my under standing the oil pressure sending unit wires are different, does anyone know of a diagram or tech article on how to wire 91 wires to a 90 oil filter housing?

Now for the vacuum ports, I am so confused here and the manual does not really explain this very well, there are pictures below of what needs to be hooked up.

Any help is greatly apperciated.


<a href="http://imageshack.us"><img src="http://img151.imageshack.us/img151/330/vacuumts8.jpg" border="0" alt="Image Hosted by ImageShack.us"/></a><br/><a href="http://g.imageshack.us/img151/vacuumts8.jpg/1/"><img src="http://img151.imageshack.us/img151/vacuumts8.jpg/1/w640.png" border="0"></a>

<a href="http://imageshack.us"><img src="http://img151.imageshack.us/img151/875/img0336ck4.jpg" border="0" alt="Image Hosted by ImageShack.us"/></a><br/><a href="http://g.imageshack.us/img151/img0336ck4.jpg/1/"><img src="http://img151.imageshack.us/img151/img0336ck4.jpg/1/w640.png" border="0"></a>

<a href="http://imageshack.us"><img src="http://img151.imageshack.us/img151/38/img0337sh2.jpg" border="0" alt="Image Hosted by ImageShack.us"/></a><br/><a href="http://g.imageshack.us/img151/img0337sh2.jpg/1/"><img src="http://img151.imageshack.us/img151/img0337sh2.jpg/1/w800.png" border="0"></a>

 

[Colt90tsi]

Today I started the car and it didnt go so smothley, it start and it ran sounded like the valves were hittin the pistons, any ideas whats going on? I timed the car and everything matched up on the cams and what not, but I have not messed with the cas?

any help is apperciated.

Any ideas on the pics above BTW?

 

[Talon2139]

1st photo-The solenoid to the far right next to the ac fuce/relay box, is the fuel pressure solenoid. the bottom one goes to the intake manifold, then the top goes to fuel regulator.
2nd photo- not sure
3rd photo- that is the ac pressure sensor.

 

[knochgoon24]

Ports 3 and 4 on your second picture are for your ERG valve.

 

[Colt90tsi]

Thanks for the replies,

So the one hose that runs off the fuel pressure solenoid that goes to the intake mani, it would go on the nipple farthest towards the passenger side of the car?

Thanks