what goes to compressor housing for mbc?

[spectr019]

Okay so for the past year I've had my boost controller pressure source to the compressor housing. This evening I changed it so the pressure source is from the bov to the manifold. I have also tee'd off the actuator to controller hose to the compressor housing. If this is wrong, please let me know!! Or if it just doesn't make sense, let me know that too. Thanks

Ben

 

[Lordpaxin]

you are running dual sources?

just source from one spot.
I always used the BOV - Intake line personally.

many will argue to pull it from the comp housing.

 

[steve]

Okay so for the past year I've had my boost controller pressure source to the compressor housing. This evening I changed it so the pressure source is from the bov to the manifold. I have also tee'd off the actuator to controller hose to the compressor housing. If this is wrong, please let me know!!

First what caused you to change it?
Second you one source or the other but don't tee them together. It just increases the chance that it will go bad.

I'm a compressor housing/jpipe nipple fan for the MBC source.

Steve