The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

What can throw off the fuel map !

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

v8killer

20+ Year Contributor
371
5
Oct 4, 2002
harlan, Kentucky
hey guys i have a problem with my car following the fuel map ! down low it will follow changes but wideopen it will be lean even when running stock boost. now i can jack the fp up to get it to follow it but at stock boost shouldn't it still be on it ?

255 fuel pump "not rewired yet"
adj fpr set to 52 base
stock 450 inj
 
What type of adjustable regulator is it? It's possible your pressure is not rising 1:1? Your profile said an ebay one, so you may want to look into a better one. You can try swapping your stock regulator to see if it solves the issue?
I would think a bad MAF sensor could put you on the wrong fuel map as well.
 
Hey toofast88,

you were just replying to my other post i didn't think to many people would look at my other thread so i open another one. this car is driving me nuts. well i had to put the ebay fpr on to fight the overrun issue with my pump, but it does rise i tried it running with air put to it ! the maf is unhacked and has been working great with no codes.......
 
Hey toofast88,

you were just replying to my other post i didn't think to many people would look at my other thread so i open another one. this car is driving me nuts. well i had to put the ebay fpr on to fight the overrun issue with my pump, but it does rise i tried it running with air put to it ! the maf is unhacked and has been working great with no codes.......

If your positive about the fpr, okay then! Like i said in the other, modify the complete fuel map to stock 2g. Do every one because i know tunerpro there are like 4 maps i believe or is that just timing? Your probably catching a load point with more aggressive settings.
 
well i put in a stock bin file so eveything is stock ! so i should be runing rich as h-ll with 52psi base fp ! but i'm not ! could it be a boost leak. i plan on checking it when i can get to a hardware store.
 
Could a bad 02 sensor cause it to be lean wideopen !
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community

Build Thread Updates

Latest Classifieds

Back
Top