What AN size is this turbo banjo

[4g63and420a]

Iam new to this braided line thing. I want to hook a AN feed line to the banjo bolt on the turbo itself. But im not positve as to the size of the banjo I think its 6an, I think. Does anyone know for sure?

 

[All_Boost16G]

Looks like 6, but i would take it with you to the shop you are getting the fitting from.

 

[4g63and420a]

-sighs- nearest shop to me is about 30 miles. And i am willing to bet it is the most expensive speed shop in the world. Not to mention my licesnce was restricted, i can only drive to and from work for the next six months. Gives me plenty of time and money to build a faster car, . but im stuck to online purchases.

 

[snailspool]

Measure it. Im pretty sure that those banjo/AN fittings are -6 but, like i said measure it to be sure.

 

[1_2befast]

The numbers for AN fittings are basically 16th of an inch. For instance; -3 ~ 3/16", -4 ~ 1/4"(4/16), -6 ~ 3/8"(6/16). Good luck getting the right parts.

 

[4g63and420a]

The numbers for AN fittings are basically 16th of an inch. For instance; -3 ~ 3/16", -4 ~ 1/4"(4/16), -6 ~ 3/8"(6/16). Good luck getting the right parts.

Thanks, that helps alot. i got it now

 

[99gst_racer]

Looks like a -4, but it's nearly impossible to tell from a close-up pic.

Throw a set of dial calipers across the outside of the threaded portion and post a pic of that.