Turbos....

[c_s_m_i_t_h]

How much psi will each hold?

Evo 16g?
18g?
20g?
GT Concepts Evo Gt?

 

[fourreGsixty3]

Those turbo's can all give 20+ psi, but it doesnt matter what they can take it matters what the rest of your set-up can take, and give to feed that turbo. A little searching and you can find awnsers to this as well. Also I see you dont have any mods currently, I would first keep your current turbo, and figure out which turbo you want to go with, then do all the supporting mods for that turbo.

Dustin

 

[c_s_m_i_t_h]

Well its just im looking to make 350-400 hp and i dont have ALOT of money so i dont want to get too big of turbo, just the right size for what im wanting....

 

[DSMunknown]

Well its just im looking to make 350-400 hp and i dont have ALOT of money so i dont want to get too big of turbo, just the right size for what im wanting....

Follow this guide and you should be fine until you actually start making significant amount of power over stock:

http://www.dsmtuners.com/sub.php?page=1gtupgrades

 

[fourreGsixty3]

Well if you dont have a lot of money dont be looking to make 350-400whp, it takes a good amount of cash to do it, and do it correctly.

Dustin

 

[MrBoxx]

Well its just im looking to make 350-400 hp and i dont have ALOT of money so i dont want to get too big of turbo, just the right size for what im wanting....

I hope you don't think that just by bolting on a ginormous turbo you'll all of a sudden be at your horsepower goals. It takes plenty of supporting mods to get there. Follow the staged upgrade guides here on the site to learn more about what needs to be taken care of BEFORE you think about getting a new turbo. By the time you're ready for a new one, you'll be experienced enough to know which one is right for you.