The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

Tuning Question

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

TurboAWDKID

15+ Year Contributor
91
1
May 24, 2004
Cuyahoga Falls, Ohio
Ok, so I just hooked up my SAFC ll today (incredibly easy) and did the initial setup and the car runs fine, well it runs the same way it did before the install. I setup the monitoring mode and such, and started messing around with the low and high settings (all +, no -, don't want to run lean and pull too much timing). My question is, how can I possibly tune my car? I have no logger, wb o2, egt gauge, or anything for that matter to see any changes I make. I plan on having it professionally tuned this spring/summer with some 550s, but I would like to have it running more efficiently before then. Is there anything I can do until then? I have read the tech articles about SAFC tuning, and realize that a logger is a must to really get anywhere, but is their anything I can do until I get a logger? Any help would be much appreciated.
 
Hokay, so, I have realized that butt dynoing isnt the way to go, and that inorder to tune properly I need a logger. What are some good logging software out there? I.E. what works the best with our cars? Also, would a PDA do just as fine as a laptop when viewing/storing data? I've looked into some logging devices, but I have no clue as to which ones are good and what is a good price. Thanks.
 
IF you are pretty experienced with tuning you can get a base tune down but ONLY if you have some experience of the feel when the car starts to pull timing or the sound of the exaust.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto STM Tuned

Latest Classifieds

  • For sale 1G DSM Interior Bits
    Selling some extra parts and pieces I've got left over and I don't need around. Prices are in...
    • Mike_Hunt
    • Updated:
    • Expires
  • Wanted Interior trim clips
    Looking for these plastic pieces and clips.
    • Rohitter7878
    • Updated:
    • Expires
  • For sale 4G63 JE 85.5 mm pistons for a 2.3 L.
    JE part #986E pistons. 85.5mm Quantity of three. 9.5-1 22mm pin. For a 2.3 liter. Good...
    • Galant665
    • Updated:
  • For sale 4G63 1g/2g Auto Welded Center Diff
    1g/2g Auto Welded Center Diff. Price is shipped USPS flatrate. Been sitting in box. Someone...
    • Galant665
    • Updated:
  • Wanted WTB 20g TD06H
    I am looking to see if anyone has a 20g TD06H turbo or equivalent for stock bolt on. I...
    • RedGST98
    • Updated:
    • Expires
Back
Top