1G Throttle body gasket and j pipe bolts

[nodaysoff92]

Hey guys used the soapy water blt and getting tons of bubbles between tb and intake manifold. Does autozone or anyone carry the gasket. Really need my baby back up and no leaks. Also what size bolts for j pipe for 16g i have a ton of bolts but most have washers and are hard fit. or cant get a wrench or socket on one or the other. Much appreciated.

 

[synthetek]

The j-pipe bolts are 8mm 1.25 you can use allen head bolts for more clearance. Most auto parts stores should have the TB gasket , or you can RTV it.

 

[nodaysoff92]

The j-pipe bolts are 8mm 1.25 you can use allen head bolts for more clearance. Most auto parts stores should have the TB gasket , or you can RTV it.

Ok sounds good and rtv around edges?

 

[synthetek]

Just a thin layer where the gasket would go.

 

[nodaysoff92]

Just a thin layer where the gasket would go.

I found some gaskets at oreilly thanks[DOUBLEPOST=1407606670][/DOUBLEPOST]

I found some gaskets at oreilly thanks

And bolts thanks

 

[spatchana]

Autozone does carry the TB gasket as do a number of parts counter stores. The part number your going to look for is (Felpro) is 60879.

 

[nodaysoff92]

Autozone does carry the TB gasket as do a number of parts counter stores. The part number your going to look for is (Felpro) is 60879.

Ok got it written down heading out in a minute thanks[DOUBLEPOST=1407607614][/DOUBLEPOST]

Autozone does carry the TB gasket as do a number of parts counter stores. The part number your going to look for is (Felpro) is 60879.

Much appreciated from both I was just getting ready to head up there.